replaced IAC now hard to crank and won't start

brianflhrcibrianflhrci Member Posts: 62 ✭✭
I recently had the fun of two beeps every minute and the engine stalled and wouldn't start so after a little digging decided to try and replace the IAC valve.  I'm pretty sure this was the issue since when I tried to restart before the replacement I still got the beeps, none now while cranking but the cranking seems labored and it won't start.  Batteries tested fine, any ideas?

Comments

  • rinker312rinker312 Member Posts: 255 ✭✭
    Iac should have nothing to do with a hard start. You could always try to put the old one back and see if it starts. I think perhaps you have multiple issues going on.  I would try to squirt some gas in the intake to see if that gets it to run. If so then you know you have some sort of fuel problem. 

    2004 Rinker 312, 5.0 Merc's, Bravo III, Lake Wheeler, AL

Sign In or Register to comment.