anybody know what's those two buttons for?

Comments

• raybo3 Administrator Posts: 5,548 admin

  July 2019

  I do not have V.P. but could that be the outdrive trim switches?

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• liuxue2010 Member Posts: 30 ✭

  July 2019

  shawnmjr said:

  Could it be a neutral button to rev without putting in gear? 

  I have left and right handle center button to rev 

  0 · Share on FacebookShare on Twitter
• liuxue2010 Member Posts: 30 ✭

  July 2019

  raybo3 said:

  I do not have V.P. but could that be the outdrive trim switches?

  The trim buttons in the left handle.

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,329 ✭✭✭✭✭

  July 2019

  They’re for the optional rocket launchers or smoke screen. 

  2008 330EC

  2 · Share on FacebookShare on Twitter
• reneechris14 Member Posts: 3,134 ✭✭✭✭✭

  July 2019

  Trim button in handle  maybe those are for trailer trim?

  2005 Rinker FV342  Pawcatuck river,Ct

  0 · Share on FacebookShare on Twitter
• DanD2 Member Posts: 848 ✭✭✭

  July 2019

  I believe it's to allow the drives to be put in trailer mode. You trim up till it stops, then press the buttons and trim and they will go all the way up......if your drives are configured that way. On my 342, the trim lever brings them all the way up.
  

  No longer a boat owner.....previous boat - 2005 Rinker Fiesta Vee 342

  0 · Share on FacebookShare on Twitter
• liuxue2010 Member Posts: 30 ✭

  July 2019

  DanD2 said:

  I believe it's to allow the drives to be put in trailer mode. You trim up till it stops, then press the buttons and trim and they will go all the way up......if your drives are configured that way. On my 342, the trim lever brings them all the way up.
  

  good to know thanks so much!

  0 · Share on FacebookShare on Twitter