Replacing NAV Lights in 310

Answers

• JonnyM Member Posts: 332 ✭✭✭

  February 2017

  I just replaced mine with LED's.  They use less power and look much brighter.  You also don't have to worry about them burning out at the wrong time.  I couldn't figure out how to get the old ones open so I broke mine off. 

  http://rinkerboats.vanillaforums.com/discussion/6632/bow-navigation-side-lights-2003-270-fv#latest

  "Mosi on Dahn"  2003 Fiesta Vee 270

  0 · Share on FacebookShare on Twitter
• Cableguy Greg Member Posts: 5,066 ✭✭✭✭✭

  February 2017

  I replaced mine with the Attwood LED lights. Best money I spent. 

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
  2022 Cherokee 294GEBG Black Label land yacht. 
  Go Steelers!!!
  

  0 · Share on FacebookShare on Twitter
• JonnyM Member Posts: 332 ✭✭✭

  February 2017

  I got mine from Great Lakes Skipper. http://greatlakesskipper.com/attwood-3500-series-ss-green-plastic-boat-2-nm-led-side-light-port-stbd-pair

  "Mosi on Dahn"  2003 Fiesta Vee 270

  0 · Share on FacebookShare on Twitter
• Aqua_Aura Member Posts: 2,690 ✭✭✭✭✭

  September 2020

  Cableguy Greg said:

  I replaced mine with the Attwood LED lights. Best money I spent. 

  @Cableguy Greg do you have the part number that you used for your nav lights. I bought LED bulbs for mine but after looking closer I want to replace the entire assembly on both sides. I'm hoping they have an LED option that uses the same screw holes? 

  1997 Bayliner 3988

  0 · Share on FacebookShare on Twitter
• Cableguy Greg Member Posts: 5,066 ✭✭✭✭✭

  September 2020

  Aqua_Aura said:

  Cableguy Greg said:

  I replaced mine with the Attwood LED lights. Best money I spent. 

  @Cableguy Greg do you have the part number that you used for your nav lights. I bought LED bulbs for mine but after looking closer I want to replace the entire assembly on both sides. I'm hoping they have an LED option that uses the same screw holes? 

  
  

  I used these ones from Attwood. 3550R7 & 3550G7 Unfortunately they did not use the same screw holes. I sealed the existing holes with 4000UV when I set the new ones in place. I believe that I got them from Amazon, but you can find them cheaper elsewhere.

  
  

  http://old.attwoodmarine.com/store/product/3530
  

  
  

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
  2022 Cherokee 294GEBG Black Label land yacht. 
  Go Steelers!!!
  

  0 · Share on FacebookShare on Twitter
• Aqua_Aura Member Posts: 2,690 ✭✭✭✭✭

  September 2020 edited September 2020

  I just ordered these off Amazon, I guess this must be the current version. For some reason finding surface mount LED lights is harder than I expected. 
  
  The pictures of these and yours makes them look so small like they won't be bright enough. But they are 2nm and USCG approved. 
  
  https://www.amazon.com/dp/B0767K9TQF/ref=cm_sw_r_cp_apa_i_ULvxFb09NM8BT

  1997 Bayliner 3988

  0 · Share on FacebookShare on Twitter