Rinker 226 Captiva plastic 4'to 5' long blower covers

Rossco1804Rossco1804 Member Posts: 1 ✭
in Rinker Support Q&A
I am trying to source the Right and Left color(black) plastic blower cover which run the length of the swim platform to the back for a 226 Rinker Captiva 2008.  I would be interested in either new or used.
· Share on FacebookShare on Twitter

Comments

  • LaReaLaRea Member, Moderator Posts: 7,946 mod
    Welcome to the forum!  First go-to for this sort of thing is Great Lakes Skipper (www.greatlakesskipper.com).  Have you tried there?
    · Share on FacebookShare on Twitter
  • mvnmvn Member, Moderator Posts: 761 mod
    I tried sourcing red ones after one of mine developed a crack originating at one of the mounting screw holes.  I was not able to find any, even at GLS.  They are made from acrylic so I ended up using an acrylic adhesive and bonding the 2 pieces together.

    Mark
    Good,  fast,  cheap.... pick two. 
    2019 MTX20 Extreme
    · Share on FacebookShare on Twitter
  • PickleRickPickleRick Member Posts: 4,243 ✭✭✭✭✭
    Who's good with 3d printing?  


    · Share on FacebookShare on Twitter
  • captkevincaptkevin Member Posts: 460 ✭✭✭
    Glue old one together & get it wrapped?
    2004 232
    2021 Yamaha Fx svho
    · Share on FacebookShare on Twitter
  • mvnmvn Member, Moderator Posts: 761 mod
    captkevin said:
    Glue old one together & get it wrapped?
    Excellent idea.
    Good,  fast,  cheap.... pick two. 
    2019 MTX20 Extreme
    · Share on FacebookShare on Twitter
  • Cableguy GregCableguy Greg Member Posts: 5,057 ✭✭✭✭✭
    Unfortunately these were made in house by Rinker. Since Polaris closed Rinker down, we no longer have a source for them. I have heard on the Facebook groups taking them to a body shop that is good with fiberglass work to get them repaired. 
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
    Go Steelers!!!
    · Share on FacebookShare on Twitter
Sign In or Register to comment.