410 folding arch for transport

Dandercam1Dandercam1 Member Posts: 6 ✭
in Rinker Support Q&A
Can anyone give me an Idea of what tools are needed to fold the arch on a 410 for transport? Driving 3.5 hrs to ship prep the boat and want to make sure I take the tools needed. Thanks!
· Share on FacebookShare on Twitter

Comments

  • aero3113aero3113 Member Posts: 9,091 ✭✭✭✭✭
    edited June 2020
    If it’s the same setup as my ‘08 330 there are 2 nuts on each side. They might be 11/16 or 3/4, possibly smaller. I can’t 100% remember the size. Just bring a set of sockets with you, they have to be deep sockets also. Don’t forget to remove the lock washers and washers under the nut before you fold the arch. I didn’t have to but you might have to disconnect some plugs for the wiring.
    2008 330EC
    · Share on FacebookShare on Twitter
  • aero3113aero3113 Member Posts: 9,091 ✭✭✭✭✭
    Also a Phillips screwdriver to remove the cover plates.
    2008 330EC
    · Share on FacebookShare on Twitter
  • oscar1oscar1 Member Posts: 762 ✭✭✭
    anybody knows who make the hardtop for rinker 310ec
    · Share on FacebookShare on Twitter
  • YYZRCYYZRC Member Posts: 5,166 ✭✭✭✭✭
    Yes it is made by SEI. 

    madebysei.com

    About $10k for a hardtop for a 330/340/360 or 370ex (all the same part). 
    2008 350 EC on Georgian Bay
    · Share on FacebookShare on Twitter
Sign In or Register to comment.