Rinker 3D logo needed

watermark

Well we had our first bad storm and our boat rode it out pretty good except for the logo on the side of the boat. I own a new 2013 Captiva 196 and the logo is positioned on the lower back side of the boat right below the cleat (bad design). The logo looks chrome (just plastic) and sticks out from the boat. Because of its position and sticking out from the boat the ropes rubbed against it and took off one of the waves. I want to replace the logo if possible. I only need the boat logo not the name. Does anyone know where I can order one? Thanks for your help!!

Black_Diamond

Call Rinker, ask for Cindy as a start, she's the parts person.

TikiHut2

.....and buy some bigger fenders...or rearrange your dock lines....or both.

Mike

watermark

What is Rinkers phone number and do you have Randy's email address? Thanks for your help! Cheers

Robs_232

Here is Cindy's e-mail. Let her know what your after and she or Natasha will respond.

cscott@nauticglobalgroup.com

watermark

Awesome thanks Robs_232!

Babyboomer

About $50 bucks at dealer last one I bought

MarkB

I assume it sticks on with double sided tape? I also assume it can't be any kind of tape.

Black_Diamond

3M makes a dual sided tape made for outdoors, you could cut it to fit the logo if it does not have its own sticky.  Or go with the 3M 77 glue spray.

watermark

Cindy was a big help! Thanks for the suggestions on how to stick it on .