Generator Choke rebuild

WeberWeber Member Posts: 249 ✭✭✭
edited October 2015 in Generator Discussions
Anyone have an exploded view of the choke assembly?

I picked up the kit and there are a lot of small parts, with no instructions or anything.

Couldn't find anything online on how it goes together, and I want to make sure I do it right.
Sin or Swim - Rinker 312
Post edited by Dream_Inn on
· Share on FacebookShare on Twitter

Comments

  • WeberWeber Member Posts: 249 ✭✭✭
    edited June 2015
    I was able to get it together by taking the other one apart and reversing the steps.

    I also noticed a design flaw that may be causing some issues.  I'll do a write up on it and attach it to this thread for anyone who may need it.
    Post edited by Weber on
    Sin or Swim - Rinker 312
    · Share on FacebookShare on Twitter
  • WeberWeber Member Posts: 249 ✭✭✭
    Here is the rebuild write up.
    Sin or Swim - Rinker 312
    · Share on FacebookShare on Twitter
  • DanD2DanD2 Member Posts: 848 ✭✭✭
    Nice job!!! Thanx for the instructions. My choke is new but it still sticks and runs rich for 3-4 minutes before finally kicking in, knowing what it looks like will help me diagnose it.
    No longer a boat owner.....previous boat - 2005 Rinker Fiesta Vee 342
    · Share on FacebookShare on Twitter
  • Dream_InnDream_Inn Member, Moderator Posts: 7,663 mod
    Very nice write-up. Need to move it under generator section (sorry can't do under mobile right now.

    Dream 'Inn III -- 2008 400 Express

    · Share on FacebookShare on Twitter
Sign In or Register to comment.