switch called "LINE 1"

Lady DanaLady Dana Member Posts: 14 ✭✭
in Rinker Express Cruisers Forum
Does anyone know the usage of it ?
· Share on FacebookShare on Twitter

Comments

  • Cableguy GregCableguy Greg Member Posts: 5,025 ✭✭✭✭✭
    That is used to activate the shore power port at the rear of the boat, or closest to that switch. If you are not using that shore power point, leave the switch off.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
    Go Steelers!!!
    · Share on FacebookShare on Twitter
  • chamberbchamberb Member Posts: 265 ✭✭✭
    On the 260 that turns on starboard shore power. 
    · Share on FacebookShare on Twitter
  • NavyCTRCNavyCTRC Member Posts: 303 ✭✭✭
    On my boat it control all AC power.  If it is off, no shore power or generator power.
    · Share on FacebookShare on Twitter
  • chamberbchamberb Member Posts: 265 ✭✭✭
    edited June 2016
    NavyCTRC said:
    On my boat it control all AC power.  If it is off, no shore power or generator power.


    Actually, that might be the same on the 260, I have a separate breaker for Port shore power in the cabin, my starboard would not work until I flipped Line 1 to "on".

    I do wonder if this switch is related to Lady Dana's earlier post about a dead battery...

    · Share on FacebookShare on Twitter
Sign In or Register to comment.