2009 Rinker 360ec Hard Top Camper Canvas Part Number Help!

rinkerray360

 Hi I have a 2009 Rinker 36o ec Hard Top and I'm looking for someone with the same. I am looking for the part number on the Ameritex tag on the camper canvas like the one pictured below. When I purchased my boat the camper enclosure was missing and I ordered a new one from Ameritex but it does not fit. They tell me the part number is the same from 2006 to 2010 but I dont believe it is. So if you have a 2009 with camper canvas like the one pictured, could you please let me know what part number you have on your tag. Tahnks

Michael T

Where doesn't it fit? I'm asking as I had a new top made for my 2014 Rinker EC 360 from Ameritex.

Handymans342

That's a camper canvas?

rinkerray360

It doesnt fit anywhere. The attachment strip was almost 2 foot longer, none of the panels are even close to the same size as me storage cover. The longer piece for the transom opening has an extra triangular piece on it. They told me these are patterns from 2006 and should fit, but if you look at the the 2006 model its not even close to the 2009, yet they claim they have the same part numbers for the enclosure. Very frustrating.

rinkerray360

Heres a 2006 360..notice the extra triangle piece to the right of the transome door. Same as the last photo in the last comment.
On the 2009 and above model 360 the transom opening is on the port side.

Cableguy Greg

If you go to RNR Marine's website, there is a difference. If I am a betting man, which I am not, I would say your 2009 360EC is a late 2009, but is actually a 2010 model. It happens sometimes... A good example it the 2002 270 Fiesta Vee. The early 2002's have the old cockpit layout and the late build 2002 270 Fiesta Vee's have the new layout with a different helm seat and dash layout.

rinkerray360

Thats probably right Greg...now i have to convince Amertiex that and get them to swap out this $2000+ worth of eisenglass because thier computer and Rinkers computer is telling them I need the 2005-2009 canvas even with giving Ameritex the hull number.

Chuckvec

We will check our tags on our boat (its the one in the picture you used).  We just took possession of it.  Get back to you later this week.

rinkerray360

Great, thanks Chuck!

Chuckvec

rinkerray:  here is what we have for pics of tags for our cabin canvas system.  Our boat is a 2009 EC 360 with the full hard top.

rinkerray360

Thank you so much!

rinkerray360

There is the problem! We both have 2009 Rinker 360's, yet the canvas says 350.

Chuckvec

I noticed that when we took the picture....We just bought the boat, so we were not involved in the purchase.  But these fit perfectly....maybe you can reference the job number. 

canvasguy

Was there any resolution with Ameritex on this problem?

Michael T

@rinkerray, looking at your second posted picture of the Rinkers I thought for a second that you were comparing a Rinker hull size that was much larger than the EC 360, like Dream Inn's, to the later styled EC 360 that is a lot smaller and hence the extra 2 feet of zipper that slides into the hard top channel but I think I am wrong about that. Rinker had a lot of overlap in boat styles that can be confusing at times!

Aprice

Not sure if this is something that could work for you. It's a fraction of the cost new one. 


http://m.ebay.com/itm/2006-08-Rinker-360-Hardtop-Aft-Camper-Enclosure-Isinglass-106582600-106581600-/332008746155?hash=item4d4d436cab:g:oIAAAOSwHMJYCSnJ&_trkparms=pageci%3A38ab1984-1a07-11e7-8d67-74dbd1801cea%7Cparentrq%3A3e6412b415b0ab64754fea31fffbc713%7Ciid%3A20