Options

Chart Plotter Power Switch

TazTaz Member Posts: 62 ✭✭
in Rinker Express Cruisers Forum

Guys

To switch the power to my chart plotter I use the switch highlighted in the picture, I would of thought the chart plotter would of been powered by the Electronic switch, any help appreciated

· Share on FacebookShare on Twitter

Comments

  • Options
    Cableguy GregCableguy Greg Member Posts: 5,013 ✭✭✭✭✭
    Was the plotter installed by the factory? On my 280, the plotter was installed by Rinker and it is turned on by the Electronics switch.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
    Go Steelers!!!
    · Share on FacebookShare on Twitter
  • Options
    TazTaz Member Posts: 62 ✭✭

    Greg

    I am the second owner but I know the guy who I bought it off and he bought its straight from Rinker

    · Share on FacebookShare on Twitter
  • Options
    diggin2day1diggin2day1 Member Posts: 1,326 ✭✭✭✭
    If it a Garmin chartplotter there are settings that allow it to be turned on via switch or the built-in power button. On my boat I use a separate switch to power on my chartplotter and power up my NMEA2000 backbone at the same time... now I never have to worry about one being on while the other is not. 
    · Share on FacebookShare on Twitter
  • Options
    Liberty44140Liberty44140 Member Posts: 4,333 ✭✭✭✭✭
    My radar/gps combo gets power from an acc switch at the panel.  
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

    · Share on FacebookShare on Twitter
  • Options
    TazTaz Member Posts: 62 ✭✭
    Liberty is it powered from the same ACC switch as mine ?
    · Share on FacebookShare on Twitter
  • Options
    Liberty44140Liberty44140 Member Posts: 4,333 ✭✭✭✭✭
    Not exactly, it is an acc switch in the help panel switches like yours but the switches on my 342 are positioned differently on the dash. 
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

    · Share on FacebookShare on Twitter
Sign In or Register to comment.