Cabin door lock

zaverin1

i need a new cabin door lock assembled for my rinker
any suggestions? 

skennelly

http://www.boatoutfitters.com/boat-latches.html?gclid=CLP6kpiB2dQCFQKRaQodSPwFjw&&pi=3

zaverin1

I will measure my current opening and thickness and go from there 

Trashman

skennelly said:

http://www.boatoutfitters.com/boat-latches.html?gclid=CLP6kpiB2dQCFQKRaQodSPwFjw&&pi=3

 Wow, only $130 if I ever break my lock on my cabin door, LOL   Looks like I'm adding one more thing to go over when I have guests on the boat

zaverin1

Luckily my door just has the cam lock
i will get it at west 
it's been going bad for sometime but this sat just snapped lol

gtyee

Check boatouitfitters.com for a new latch. I bought one for my 310 but cant remember where. Look on the lock for manufacturer as I did and google it.

zaverin1

Ye they have it
west has one also by my house
need to there anyway to get 2 stroke oil

Captain_Rob

Need help with cabin entry latch repair.  Someone tried to pry open cabin door while I had it in storage.  They failed and left me with a new problem to fix.  They must of been afraid of my watch spider and ran away.  Any suggestions would be great.

randy56

it should still unlock with the key?

goalie59

I had the same problem from a very rough ride back from the lighthouse one year. The lock has a very flimsy piece of starboard material that wedges into the door. It can only take so much abuse before it breaks in half where the mounting screw goes through. I have made up several and change them out every year. I wish I could come up with a stronger material but then maybe it would break the door

Captain_Rob

The lock still does work with the key.  Funny thing about it was the key was in the cup holder under towel next to the door.  Not a very smart thief, but they always say that thieves are not the smartest people.

Liberty44140

Rob, should be a Phillips screw on the inside of the lock, just loosen the screw and slide the lock back in to place, re tighten

goalie59

Liberty, if you look closely at the pic there is a black block that holds the lock into the door . It is at the end of the lock. The screw goes through the lock and the block to hold it all together. The block will have to be replaced or there will be nothing to hold the lock to the door

Nancyg

Looking to remove the lock, where is your pic?  Would help.  Tks