Radar arch plates and new ITC LED lights

diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
Selling a set of custom radar arch plates and (2) brand new ITC white LED lights. Arch plates are made of 1/2" thick King Starboard and have the ITC lights pre-installed. Center "blank" arch plate has logo carved into it. Selling for $190 plus shipping. 

Comments

  • trip_ntrip_n Posts: 356Member ✭✭✭
    @diggin2day1====very nice ...i like
    how/where do you power
    thanks
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    trip_n said:
    @diggin2day1====very nice ...i like
    how/where do you power
    thanks
    You can use the existing wiring that powers your radar arch lights. 
  • trip_ntrip_n Posts: 356Member ✭✭✭
    have the 06 270 ec....no arch lights
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    trip_n said:
    have the 06 270 ec....no arch lights
    Do you have the blank plates in your radar arch? If you remove one of the blanks and look, it might be pre-wired for lights. If not, you could easily run two wires from the “ACC” switch on your dashboard up through the arch. 
  • trip_ntrip_n Posts: 356Member ✭✭✭
    i will check,,,,,,,,,,,,,,,,,,,,,,thanks
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    My wires are ran down the Starboard side of the arch... remove the speaker by the shifter/throttle and you have access... run the wires inside that wall and up to your switch panel. If you have a free ACC switch you can power the lights from there. 
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    Arch Plates with new ITC Tri-Color LEDs... $215 (only one set of LEDs left)
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 3,458Member ✭✭✭✭✭
    These are on my short list of things to buy in the spring.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • mpn1relmpn1rel NJPosts: 7Member ✭✭
    Hi diggin2day1....Can you put the ITC LED in the 3rd one?  I want lighting on all 3. These should fit my FV342....Will try and confirm the size this weekend...but I do want them if I can get all (3) the same with the LED....Thanks. (You are making me steps now - probably can include it in the shipping)
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    mpn1rel said:
    Hi diggin2day1....Can you put the ITC LED in the 3rd one?  I want lighting on all 3. These should fit my FV342....Will try and confirm the size this weekend...but I do want them if I can get all (3) the same with the LED....Thanks. (You are making me steps now - probably can include it in the shipping)
    Sure can... These arch plates fit your FV342. 
  • downunderdownunder Gold Coast AustraliaPosts: 13Member
    will they fit a FV 340 ?
    they look good
    "mancave" - 2001  340 FV
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    downunder said:
    will they fit a FV 340 ?
    they look good
    Yes sir.... if you want measurements to confirm I can get them to you. 
  • Michael TMichael T Posts: 6,347Member ✭✭✭✭✭
    @diggin2day1....your imagination is incredible and your workmanship is awesome. really, really impressive. It just keeps getting better. You're probably going to get a call from Kim Slocum one of these days asking you to augment their options with custom orders from your shop. If I was Kim you sure as h*ll would be hearing from me! IMO - today it's all about quality custom work!
  • MarkBMarkB OntarioPosts: 3,046Member ✭✭✭✭✭
    Nice, I was waiting for you to start marketing these. That CNC machine is coming in handy!

    Boat Name: King Kong

    "Boat + Water = Fun"

  • boatman37boatman37 Posts: 83Member ✭✭
    Makes me want to buy a Rinker just to put those on it...lol. Me and diggin have been PM'ing for awhile. I have a similar CNC in my garage and have been playing with it for 3 years and my stuff looks like crap compared to his. Very nice work!

    So you ask why I am here if I don't have a Rinker...lol. Currently have a Sea Ray but looking to upgrade and Rinkers are on my short list
  • randy56randy56 Newburgh INPosts: 2,105Member ✭✭✭✭
    welcome aboard. 
    Boat Name : Knot My Prolem

    2003 - 270
  • TrashmanTrashman New Jersey/ philaPosts: 426Member ✭✭✭
    Very nice work @diggin2day1.  Can’t wait to get my next new to me boat so I can customize with your creations! 
  • Equinox1Equinox1 Posts: 1Member
    Do these fit a 2005 320.?
  • Cableguy GregCableguy Greg Pittsburgh, PAPosts: 3,458Member ✭✭✭✭✭
    How much for 2 of the ITC plates with no lights and one blank logo plate?
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA
    Go Steelers!!!
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    Equinox1 said:
    Do these fit a 2005 320.?
    Yes they do
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    How much for 2 of the ITC plates with no lights and one blank logo plate?
    Hi Greg, $125 for the set of (3) in any combination. 
  • trip_ntrip_n Posts: 356Member ✭✭✭
    edited May 8
    @diggin2day1= i would like to contribute to the new prop fund.
    i would like a set for our 06 270ec=blue rinker blue=plz
    or is it the itc =led tri

  • laker83laker83 Posts: 10Member
    We have 05 270.. would be interested in light green if available
  • mskpharmdmskpharmd Posts: 40Member ✭✭
    How about a set for my 33? Price and time line to receive.
  • Nick_03FV310Nick_03FV310 Posts: 17Member
    How does the tri color work? Do we need to wire a separate switch?
  • Michael TMichael T Posts: 6,347Member ✭✭✭✭✭
    @maskpharmd.....not on most. On the older style turning on and off the switch activates the different colors. If you have multiples and one gets out of sync you just disconnect it at a certain color then scroll through the rest until all are the same then re-connect it.
  • diggin2day1diggin2day1 Long Island, NYPosts: 1,061Member ✭✭✭
    How does the tri color work? Do we need to wire a separate switch?
    Just like Michael said... when you toggle the switch off then back on, the LEDs change to the next color. You have the choice of leaving them on either red, blue OR white. 
Sign In or Register to comment.