Options

342FV w/350 mags RPMs

McGarnicleMcGarnicle Member Posts: 242 ✭✭✭
edited July 2018 in Rinker Express Cruisers Forum
What is everyone typically seeing RPM wise with their 350 Mags?

I have 24P props and most I was able to get out them was around 4,200 yesterday. 


· Share on FacebookShare on Twitter

Comments

  • Options
    davidbrooksdavidbrooks Member Posts: 1,347 ✭✭✭✭
    That is close to what i was seeing before i started making changes.  Any growth on the bottom, and i mean any would slow me down and lower the max RPM's.  I switched over to Hill 22p 4x4 props and my new WOT is now just under 5k. 
    It's 5 O'Clock Somewhere!
    · Share on FacebookShare on Twitter
  • Options
    StodgeStodge Member Posts: 2,738 ✭✭✭✭
    I have the same props and that sounds about the same as what I see.  I normally cruise around 3300-3400 RPM which is around 27 mph.

    2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

    · Share on FacebookShare on Twitter
  • Options
    Liberty44140Liberty44140 Member Posts: 4,332 ✭✭✭✭✭
    It varies in Freshwater vs Salt as you'll read by searching the forum. I have twin 350's with Bravo 3 drives in my 06' 342 with 22p three blade props. I like to cruise at 3900 rpm at 28-29 mph, she seems to like that, but I can cruise at 3700 rpm at 26-27 mph. WOT is 5000 rpm at 40 mph, just did that Saturday for 10 seconds. 
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

    · Share on FacebookShare on Twitter
  • Options
    reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    I put up the same #s as @Liberty44140.
    05 342 350mag stock 22p props.
    2005 Rinker FV342  Pawcatuck river,Ct
    · Share on FacebookShare on Twitter
Sign In or Register to comment.