Folding the Radar Arch

determineddetermined Member Posts: 16 ✭✭
in General Boating Discussions

Hello everyone,

On a 2012 Rinker 360.  The arch is made to fold.  I've done it before with muscle power.   There must be an easier way.

Any tips from anyone?

Thank you.

· Share on FacebookShare on Twitter

Comments

  • moodymoody Member Posts: 5 ✭
    need to transport my 390, and need to fold the radar arch. never done this before, when i take the plates off there are 2 bolts and a hex bolt. do i take all of them out to lower the arch?
    · Share on FacebookShare on Twitter
  • aero3113aero3113 Member Posts: 9,071 ✭✭✭✭✭
    edited April 2021
    On my ‘08 330 I only have the 2 nuts and washers to remove. It’s heavy, it can be done with 2 people but 3 is better. Once you pass the pivot point, it gets heavy fast! Make sure you remove the washers before you fold it.


    2008 330EC
    · Share on FacebookShare on Twitter
  • aero3113aero3113 Member Posts: 9,071 ✭✭✭✭✭
    You can see the two studs for the nuts and washers in this pic.


    2008 330EC
    · Share on FacebookShare on Twitter
  • redlightningredlightning Member Posts: 284 ✭✭✭
    What he said.  Been there done that.
    2011Sea Ray 450 Twin 8.2’s Bravo III Sterndrive
    2012 390 Sea Ray Twin 8.2’s Inboard - Sold
    2008 330 Express Cruiser - Sold
    · Share on FacebookShare on Twitter
  • moodymoody Member Posts: 5 ✭
    Thanks for the info, went to the boar this weekend and removed the bolts and tried to push up and i agree its heavy, bolted it back down. will need some help to lower, i was thinking having my son and 3 of his buddies to lower.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.