Bow cushion support

Comments

• Sandkrice Member Posts: 20 ✭✭

  December 2013

  No, I don't. The boat is 750 miles away and I will not see her til late April. It is the large (roughly 4'x3') center cushion in the vee birth that you remove to place a table for dining or insert this large filler cushion for sleeping. Not sure if that helps much?

  2 · Share on FacebookShare on Twitter
• Michael T Member Posts: 7,241 ✭✭✭✭✭

  December 2013

  Sandkrice - obviously you don't know RinkerYan. Steve doesn't want a picture of your cushion he wants one of your a**. :-) MT  Oh Yeah - that was tooooo easy!

  3 · Share on FacebookShare on Twitter
• Capt_Steve Member Posts: 281 admin

  December 2013

  Wonder if there's enough room underneath to screw a couple of cross braces into the wood? Eventually it sounds like you'll be replacing the broken piece and reupholstering.

  2 · Share on FacebookShare on Twitter
• Sandkrice Member Posts: 20 ✭✭

  December 2013

  Well that took an awkward turn for the worse! RinkerYan- I would post pics of the large a$& but you have to promise not to make fun of my tramp stamp... Capt Steve- I regret to say that I never considered a SIMPLE solution like cross bracing! I was thinking more along the lines of a cut down table pedestal but it wouldn't offer support except in the very center. Cross bracing should work nicely. Thanks

  1 · Share on FacebookShare on Twitter
• Cableguy Greg Member Posts: 5,069 ✭✭✭✭✭

  December 2013

  Angle aluminum would work great for a cross brace. You can pick it up at the local big box home improvement center.
  

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
  2022 Cherokee 294GEBG Black Label land yacht. 
  Go Steelers!!!
  

  1 · Share on FacebookShare on Twitter