Hatch Linear Actuator

Comments

• Black_Diamond Member Posts: 5,439 ✭✭✭✭✭

  March 2020

  Lenco’s are good. Just get the correct stroke length and lift capacity. 

  Past owner of a 2003 342FV
  PC BYC, Holland, MI

  1 · Share on FacebookShare on Twitter
• Aqua_Aura Member Posts: 2,656 ✭✭✭✭✭

  March 2020

  What's the issue you are having? 

  1997 Bayliner 3988

  0 · Share on FacebookShare on Twitter
• goalie59 Member Posts: 349 ✭✭✭

  March 2020

  it has a hard time to lift at the start of it's stroke and at the end of the stroke there seems to be a lot of end play. It is original to the boat

  0 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 7,860 mod

  March 2020

  I assume you've already greased the actuator (if there's a grease nipple) and checked the electrical connector for corrosion.  And you're sure the play is in the actuator, not the fitting on the underside of the hatch?  That fitting is supposed to have an inch or two of play.  

  0 · Share on FacebookShare on Twitter