Steering Wheel Removal

Answers

• aero3113 Member Posts: 9,324 ✭✭✭✭✭

  May 2020

  It should pull off, maybe try some penetration oil on it.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• TonyA Member Posts: 93 ✭

  May 2020

  I only had wd40 and tried that. Will pick up some penetrating oil. So there’s no trick to it It should pull off.

  2008 Rinker 400EC Longport NJ

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,324 ✭✭✭✭✭

  May 2020

  Should just pull off. Mine is a splined shaft, yours looks like a tapered shaft with a key. It’s probably just stuck on good. What type of puller are you using?

  2008 330EC

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,324 ✭✭✭✭✭

  May 2020

  If the oil doesn’t work try a torch to heat it up.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• TonyA Member Posts: 93 ✭

  May 2020

  Thanks will give that a try.

  2008 Rinker 400EC Longport NJ

  0 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,547 admin

  May 2020

  Hammer some wooden wedges under the collar then put the nut back on slightly then hit the stud with a hammer and it should pop right off

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter