Correct Anchor for 246 Captiva

Comments

• Options

  mattie Member Posts: 1,253 ✭✭✭✭

  May 2021

  @shawnmjr correct - just can’t remember if it was a 9lb or 14lb Danforth. Measure the clips & compare to the chart.
  
  https://danforthanchors.com/thestandard/
  

  246BR, 276BR, H310BR current

  0 · Share on FacebookShare on Twitter
• Options

  mattie Member Posts: 1,253 ✭✭✭✭

  May 2021

  Be sure to add at least 4ft of chain rode to the anchor........

  246BR, 276BR, H310BR current

  0 · Share on FacebookShare on Twitter
• Options

  mdickinson Member Posts: 2 ✭

  May 2021

  Do you remember where you got yours? The anchor locker in my boat is only 11” wide 

  0 · Share on FacebookShare on Twitter
• Options

  69fastback Member Posts: 949 ✭✭✭

  May 2021

  mdickinson said:

  Do you remember where you got yours? The anchor locker in my boat is only 11” wide 

  I have the same issue in my 232. The locker is very small, for the size of boat and anchor needed to hold it. 

  0 · Share on FacebookShare on Twitter
• Options

  earl1z19 Member Posts: 333 ✭✭✭

  May 2021

  I know on my 07 246 I had to cut the anchor to fit. Width was fine the length of the shank was the issue. I cut it off and drilled a new hole and was good to go

  0 · Share on FacebookShare on Twitter