Hill Marine Props and Fuel Consumption

13»

Comments

  • YYZRCYYZRC ✭✭✭✭✭
    edited June 2023
    @johnny44 I exhausted every other possibility. I had just been waiting for the opportunity to pull the boat into shallow water to do the swap. Finally got it yesterday. 

    No response yet from Hill but I just emailed them last night so not expecting to hear back immediately. In the meantime I will try to measure the pitch myself.
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • GrahamuGrahamu ✭✭✭
    City Wide Welding in Mississauga can check them for you
  • johnny44johnny44 ✭✭✭
    @yyzrc any updates or response yet from Hill?
    Former Boat: 2008 350 EC 
    Current Boat: 2002 Silverton 410 Sport Bridge
    Greenwich Bay, Rhode Island
  • YYZRCYYZRC ✭✭✭✭✭
    edited June 2023
    Well, they replied promptly and said this has never happened before and asked me to ship the props back. They said they would send a prepaid label but I haven’t received one yet. 

    I think I will have them analyzed by a prop shop before I send them. It would be nice to know from an impartial source what the issue is (pitch or cupping or…?). 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC ✭✭✭✭✭
    Update - Hill sent me a prepaid label to return the wonky props. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC ✭✭✭✭✭
    edited September 2023
    Hill received my defective props. We agreed that I would purchase a set of 18p and they would exchange the defective 20p for 18p.

    Will report on the difference between the 20p and the 18p on my 350EC.
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • Have you received props yet?
    2004 232
    2021 Yamaha Fx svho
  • YYZRCYYZRC ✭✭✭✭✭
    edited September 2023
    Edit: just received the props 5 mins ago. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • That stinks. What did they say about the screw up?
    2004 232
    2021 Yamaha Fx svho
  • YYZRCYYZRC ✭✭✭✭✭
    I gave up on them. Not worth the brain damage. It just is what it is now. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • J3ffJ3ff ✭✭✭✭✭
    Wait.. they wouldnt refund you? What's the deal? 
  • YYZRCYYZRC ✭✭✭✭✭
    They said it had been too long since I purchased the props - it was a year later. A year that I spent chasing the problem. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC ✭✭✭✭✭
    Cool underwater shot. 


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC ✭✭✭✭✭
    Here’s my experience 18p vs 20p on the 2008+ 350/360 with 6.2L / 377 and Bravo 3. Same day same weather conditions. Boat was probably 200 pounds lighter (fuel burn) with the 18p. 

    Note that I have about 1000lbs of dinghy + hardware on my platform and therefore I needed the extra push of 18p. Without the dinghy 20p is perfect for the 350/360 in my opinion. 

    20p @ 28mph

    18p @ 28mph

    So +250 rpm to maintain same speed. Exact same fuel burn despite higher rpm. I don’t love having to run at higher rpm but the boat planes wayyyyyyy quicker now. There are a lot of areas where I have to come off plane and then pop back on plane again so this is good for me.
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • Glad to hear you got your props.
    2004 232
    2021 Yamaha Fx svho
  • YYZRCYYZRC ✭✭✭✭✭
    I've done a bit of reading regarding mixing pitches on Bravo 3. I think I will do one more test (if the weather permits) and put the 20p on the rear (stern side) and leave the 18p on the front (bow side). 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRC said:
    I've done a bit of reading regarding mixing pitches on Bravo 3. I think I will do one more test (if the weather permits) and put the 20p on the rear (stern side) and leave the 18p on the front (bow side). 
    Interesting...can't wait to see how this goes.

    2006 Fiesta Vee 270
Sign In or Register to comment.