2004 342 vee waste and fresh water sensors where to buy

Comments

• Black_Diamond Member Posts: 5,439 ✭✭✭✭✭

  June 2015 edited June 2015

  No fixing. They can be bought at www.fireboy-xintex.com. You can buy them calibrated to length or cut and calibrate yourself. If I remember right: 19". There is a sticker on top that shows the length. 

  Past owner of a 2003 342FV
  PC BYC, Holland, MI

  0 · Share on FacebookShare on Twitter
• Mully Member Posts: 16 ✭✭

  June 2015

  Great thanks

  0 · Share on FacebookShare on Twitter
• PierPressure Member Posts: 4 ✭

  June 2015

  Pretty sure they are 17" long, I think the number on the top is 17 346. You can access the waste holding tank sensor by removing the access cover under the port side seat. the fresh water tank is on the starboard side, the access cover is behind the ice maker

  1 · Share on FacebookShare on Twitter
• Black_Diamond Member Posts: 5,439 ✭✭✭✭✭

  June 2015

  Yup. 17". Just found my old receipt

  Past owner of a 2003 342FV
  PC BYC, Holland, MI

  0 · Share on FacebookShare on Twitter
• JC290 Member Posts: 706 ✭✭✭

  June 2015

  Stupid question but you did check power I hope found mine came loose at the back of the gauge 

  0 · Share on FacebookShare on Twitter
• Mully Member Posts: 16 ✭✭

  June 2015

  okay great thanks , yes i checked the power the guage lights up but shows empty even the waste does too.

  0 · Share on FacebookShare on Twitter
• davidbrooks Member Posts: 1,416 ✭✭✭✭

  May 2017

  @Mully did you end up replacing your sensors? Same exact thing happened to me this spring.  Both showing as empty even though I know the water is full and the holding tank isn't empty.... especially with a wife and daughter.  I was thinking it was the guage on the circuit breaker panel.  

  It's 5 O'Clock Somewhere!

  0 · Share on FacebookShare on Twitter
• Stodge Member Posts: 2,738 ✭✭✭✭

  May 2017

  Been thinking of "fixing" mine too.  Waste is a bigger concern for me than water.  Guess it's time to go "fishing".  

  2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

  0 · Share on FacebookShare on Twitter
• Liberty44140 Member Posts: 4,414 ✭✭✭✭✭

  May 2017

  Here is another way to handle this which guarantees you know the tank level and you dont have to deal with the gauges:
  
  https://rinkerboats.vanillaforums.com/discussion/5826/342-waste-water-tank-view#latest
  

  07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)
  
  

  0 · Share on FacebookShare on Twitter