Anybody know where I can find these?

HamdogHamdog Member Posts: 247 ✭✭
in Rinker Express Cruisers Forum
The 3 light covers on the radar arch.
"Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
· Share on Facebook

Comments

  • ChillLaxinChillLaxin Member Posts: 28 ✭✭
    "What are those!!" Sorry, couldn't resist. My 14 and 11 year old boys are always saying that...... I digress. lol
    · Share on Facebook
  • BayrunnerBayrunner Member Posts: 177 ✭✭✭
    Try here first http://greatlakesskipper.com/ and if you don't find it go on Ebay and search Rinker Boat parts.
    Bayrunner -- FV312 - Simple Pleasure
    · Share on Facebook
  • Cableguy GregCableguy Greg Member Posts: 5,079 ✭✭✭✭✭
    Great Lakes Skipper has some. Measure yours before you buy.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
    · Share on Facebook
  • HamdogHamdog Member Posts: 247 ✭✭
    Ok. What do you even call "those"? I searched but could not find.
    "Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
    · Share on Facebook
  • BayrunnerBayrunner Member Posts: 177 ✭✭✭
    edited May 2016

    RINKER 220590 CREAM 420 PLASTIC 15 X 7 INCH BOAT ARCH PLATE and you can find it at the Great Lake Skipper website for 9.95.  remember to measure yours.

    Bayrunner -- FV312 - Simple Pleasure
    · Share on Facebook
  • Cableguy GregCableguy Greg Member Posts: 5,079 ✭✭✭✭✭
    When you replace them, get the ITC tricolor lights. They will make your boat look pretty cool.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
    · Share on Facebook
  • Michael TMichael T Member Posts: 7,241 ✭✭✭✭✭
    Jerry, I bought two extras from Rinker for my former 360 as I was worried they would crack at some point. they shipped them to me in bubble wrap. There is a company who makes them for Rinker. it may be called Jet Products? Others may carry them but I know for a fact that Rinker does.
    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
    Make them out of King Starboard...
    · Share on Facebook
  • ChillLaxinChillLaxin Member Posts: 28 ✭✭
    edited May 2016
    Pretty cool, diggin. They look great!
    · Share on Facebook
  • Dream_InnDream_Inn Member, Moderator Posts: 7,954 mod
    Looks great Diggin'!

    Dream 'Inn III -- 2008 400 Express

    · Share on Facebook
  • HamdogHamdog Member Posts: 247 ✭✭
    Neither Great Lakes Skipper or EBay have the ones I need. Mine only have 4 screws. I checked Amazon as well.
    "Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
    · Share on Facebook
  • Cableguy GregCableguy Greg Member Posts: 5,079 ✭✭✭✭✭
    Doesn't Rinker have them? I just looked at a 2016 290EC that Happy Days Boating has in stock and it looks like they are still using that style in the photos. They might not be the same color, but it might be worth a shot to ask them if you already haven't. Heck, they told me that they no longer had my boot stripe, but they found some for me, at $6/foot. The dealer is selling it to me at $3.25/foot, which is still highway robbery. Once I get some, hullstripes dot com told me he could make a 150' roll a heck of a lot cheaper than what I can get it thru Rinker.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
    · Share on Facebook
  • Michael TMichael T Member Posts: 7,241 ✭✭✭✭✭
    Yes guys, as my e.mail above states, I just purchased two from Rinker. I think Jet Technologies makes them for Rinker, I know JT used to make a lot of parts for Rinker.
    · Share on Facebook
  • HamdogHamdog Member Posts: 247 ✭✭
    Thanks guys. Received from Rinker. All three for $120. Ofelia Jimenez filled the order. She is the Office Manager. 574-970-5188. Ojimenez@rinkerboats.com as Shelby posted in an earlier discussion.
    "Wetted" Bliss 2005 Rinker 342 - Black Hull - Twin Mercruiser 350 Mags - BIII's
    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
    edited October 2017
    ...
    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
     x
    · Share on Facebook
  • rasburyrasbury Member Posts: 8,990 ✭✭✭✭✭
    sweet!
    · Share on Facebook
  • jbendixjbendix Member Posts: 27 ✭
    Nice!
    · Share on Facebook
  • MarkBMarkB Member Posts: 4,009 ✭✭✭✭✭
    digging, how did you round the edges off?

    Boat Name: King Kong

    "Boat + Water = Fun"

    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
    MarkB said:
    digging, how did you round the edges off?
    Those were the ones I made with a hand-held router... the new arch plates I make are made with a CNC.
    · Share on Facebook
  • Handymans342Handymans342 Member Posts: 10,375 ✭✭✭✭✭
    They look great installed Mark
    · Share on Facebook
  • MarkBMarkB Member Posts: 4,009 ✭✭✭✭✭
    Nice. Is that one of your toys, diggin?

    Boat Name: King Kong

    "Boat + Water = Fun"

    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
    MarkB said:
    Nice. Is that one of your toys, diggin?
    Yes, sir!!
    · Share on Facebook
  • MarkBMarkB Member Posts: 4,009 ✭✭✭✭✭
    Do you make Christmas presents with that? LOL. I can just see the whole family getting CNC plates, cups, holders, whatever.

    Boat Name: King Kong

    "Boat + Water = Fun"

    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
    MarkB said:
    Do you make Christmas presents with that? LOL. I can just see the whole family getting CNC plates, cups, holders, whatever.
    My wife has a long list of demands from that CNC machine... lol. I am also a board member on our youth football organization and they want me to make some of the trophies/plaques... there’s just not enough time in the day!!!
    · Share on Facebook
  • Michael TMichael T Member Posts: 7,241 ✭✭✭✭✭
    .....and who bought that machine?????
    · Share on Facebook
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Hey now the primary purpose of that machine is to produce Rinker parts other things are going to have to wait. Just saying.
    2005 Rinker FV342  Pawcatuck river,Ct
    · Share on Facebook
  • diggin2day1diggin2day1 Member Posts: 1,331 ✭✭✭✭
    Listen, I AM THE BOSS IN MY HOUSE... and I have my wife’s permission to say that. 
    · Share on Facebook
Sign In or Register to comment.