Installed vessel view 4, engines will not turn off independently.

WildboatingWildboating Member Posts: 957 ✭✭✭
in Electrical Discussions
Title says it all?  Any suggestions??
2003 Rinker 342 Fiesta Vee, 350 Mag MPI, Bravo 3 2.20:1 w/ 22p 4 x4 props

· Share on FacebookShare on Twitter

Comments

  • WildboatingWildboating Member Posts: 957 ✭✭✭
    Update:  if only 1 junction box is in system without a can link between the boxes the symptom is the ignition becomes linked. 
    2003 Rinker 342 Fiesta Vee, 350 Mag MPI, Bravo 3 2.20:1 w/ 22p 4 x4 props

    · Share on FacebookShare on Twitter
  • Dream_InnDream_Inn Member, Moderator Posts: 7,720 mod
    Did you remove the can power from one of the engines?  I believe you can only have power from one engine.

    Dream 'Inn III -- 2008 400 Express

    · Share on FacebookShare on Twitter
  • WildboatingWildboating Member Posts: 957 ✭✭✭
    Dream,  mercruiser did not mention anything about disconnecting the can from one engine.  Do you have more info?
    2003 Rinker 342 Fiesta Vee, 350 Mag MPI, Bravo 3 2.20:1 w/ 22p 4 x4 props

    · Share on FacebookShare on Twitter
  • diggin2day1diggin2day1 Member Posts: 1,329 ✭✭✭✭
    Wildboating- whenever I have had issues with installing/using my VV4, the gateway or anything SmartCraft related I called Mercruiser. Kim was BY FAR the most helpful person I've ever dealt with. Maybe call them back and see if they can help out.  
    · Share on FacebookShare on Twitter
  • WildboatingWildboating Member Posts: 957 ✭✭✭
    I worked with William Lund today who told me I needed 2 separate j boxes with a can interlink cable.  All works fine minus the key hassel. 
    2003 Rinker 342 Fiesta Vee, 350 Mag MPI, Bravo 3 2.20:1 w/ 22p 4 x4 props

    · Share on FacebookShare on Twitter
Sign In or Register to comment.