4 step ladder

2»

Comments

  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    I ended up ordering, thank you for the info! Will get it installed asap. 
  • 99270fv99270fv Member Posts: 94 ✭✭
    I went to the hardware store and got rubber washers to go between the mount and platform and also sealed with 4200. I also backed the mount with 3"x12" x 1/4" aluminum strips along the ladder stringers inside the platform. 
  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    99270 - what was your total charge? I see something pending on mine for 260.99 from highwater marine..  225 was already enough, 260 is nuts for a ladder. lol
  • Cableguy GregCableguy Greg Member Posts: 5,077 ✭✭✭✭✭
    That might include the shipping charges.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    That might include the shipping charges.
    Sure - but when I ask "how much" and the response is 225... another 35 ontop of it should probably be noted! I think after 250 I would have said forget it and kept the darn 3 step ladder. 
  • Cableguy GregCableguy Greg Member Posts: 5,077 ✭✭✭✭✭
    I agree that the extra 35 would be a huge surprise. A phone call to them might be in order if they quoted you 225 including shipping.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    I asked "how much does one of these run?"  and the response was "The ladder is $225."  

    So yeah, no shipping included, but maybe when it's more than 10 bucks of shipping...it should be stated outright. 
  • 99270fv99270fv Member Posts: 94 ✭✭
    its just money :)  what else are you going to do with $260...$259.60   my wife, pretty much said she didn't care what it cost she wanted one on there
  • 99270fv99270fv Member Posts: 94 ✭✭
    316 Stainless Steel 8 Boat Polished Boat Marine Grab Handle Handrail
    Estimated delivery : Thu. Mar. 2
    Tracking Number : 9200190134519228948131
    Shipping service : Standard Shipping
    Item # : 281988561710


    now you need to go to ebay and order one of these to mount to the swim platform between the ladder rails.    its just money!

  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    I actually got one of those for free!! All I'm saying is that when I ask "how much" I expect a TOTAL price. Not a price for part and a super inflated shipping price. For 35 dollars this thing better be shipped overnight Sunday delivery. 
  • Dream_InnDream_Inn Member, Moderator Posts: 7,946 mod
    you'll love the four steps.  Mine came with it and what a difference from the 3 steps we had on our 310!  You could just buy a used 400 and get the ladder with it! :)  (long story short, the admiral always wanted a larger sink with the 310....told the rinkervous crew we got a larger sink, boy were they surprised! :) )

    Dream 'Inn III -- 2008 400 Express

  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    I actually had 4 step ladders one my previous two boats, so I know I'll like it. I actually just got a response 4 minutes ago saying "225 plus shipping and tax" 

    Fine....okay..........this is how boating goes.....just saying, 225 is not the same as 260  :'(
  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    Zero Sealant on mine too.... What's up with that
  • Dream_InnDream_Inn Member, Moderator Posts: 7,946 mod
    Looks good @j3ff !  I have a 4 step on mine and it is great! Well worth the extra effort to change it out!

    Dream 'Inn III -- 2008 400 Express

  • J3ffJ3ff Member Posts: 4,232 ✭✭✭✭✭
    Yeah, I just can't believe there was no sealant at all! I do have to swap the screws to some flat head ones next weekend..excited to use it this summer! 
  • JoeStangJoeStang Member Posts: 1,138 ✭✭✭✭
    I plan on ordering this one to replace my 3 step windline. Specs look to be OK for my 276.

    https://www.amazon.com/gp/product/B00DOS0L8G/ref=ox_sc_sfl_title_8?ie=UTF8&psc=1&smid=ATVPDKIKX0DER

    2013 276 Cuddy ~ 350 MAG / B3
  • 99270fv99270fv Member Posts: 94 ✭✭
    better check the width again
  • JoeStangJoeStang Member Posts: 1,138 ✭✭✭✭
    According to Windline's website the one installed on my 276 is 12" wide, same as the JIF marine one I posted.
    2013 276 Cuddy ~ 350 MAG / B3
Sign In or Register to comment.