Round Cockpit table for sale

Comments

• Glassguy54 Member Posts: 588 ✭✭✭

  April 2018

  Hey @diggin2day1, have you thought about adding bronze powder to the epoxy filler in the carved out areas so it looks like metal inlay? That would be bitchin!

  1 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  April 2018

  I am experimenting with different powders/tints... it’s tough to get it to blend evenly and not get 4 million bubbles while mixing the epoxy. Some cool stuff though!

  0 · Share on TwitterShare on Facebook
• aero3113 Long Island, NYMember Posts: 5,932 ✭✭✭✭✭

  April 2018 edited April 2018

  @diggin2day1 I'm sure you already know but when working with epoxy like this and you get bubbles use a heat gun before it starts to set and they come right up to the top and disappear. I made a bar and poured an epoxy top, had bubbles used the heat gun and every single one went away.

  2008 330EC

  4 · Share on TwitterShare on Facebook
• Stodge Lake St. ClairMember Posts: 2,737 ✭✭✭✭

  April 2018

  Just so I can start saving my nickles, how much for a rectangle shape table?  Round is nice for drinks but useless to eat at.  

  2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

  2 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  April 2018

  Stodge said:

  Just so I can start saving my nickles, how much for a rectangle shape table?  Round is nice for drinks but useless to eat at.  

  Depending upon size, carvings, lip, stainless cup holders, mahogany stripes, etc... approx $400 and up.  
  

  1 · Share on TwitterShare on Facebook
• Stodge Lake St. ClairMember Posts: 2,737 ✭✭✭✭

  April 2018

  diggin2day1 said:

  Stodge said:

  Just so I can start saving my nickles, how much for a rectangle shape table?  Round is nice for drinks but useless to eat at.  

  Depending upon size, carvings, lip, stainless cup holders, mahogany stripes, etc... approx $400 and up.  
  

  Just like the one pictured, just 16x28 or so in size.  I have to measure what I have now.

  2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

  0 · Share on TwitterShare on Facebook
• JPC Member Posts: 41 ✭✭

  April 2018 edited April 2018

  That is a beautiful table top.  Is it the same size as the round plastic table pictured?  

  1 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  April 2018 edited April 2018

  JPC said:

  Is this the same size as the round plastic table pictured?  

  Yes it is

  0 · Share on TwitterShare on Facebook
• trip_n Member Posts: 697 ✭✭✭

  April 2018

  @diggin2day1==fyi someone on rinker group facebook.....is looking for a table

  1 · Share on TwitterShare on Facebook
• mikejudd65 Gloucester, MAMember Posts: 25 ✭✭

  April 2018

  table still available? @diggin2day1
  
  I also posted on your FB page about cabin steps for a 2004 342 ....... 

  "Next Adventure" 2004 Rinker Fiesta Vee 342 , FWC Horizon Mercs, Blue Imron Hull

  1 · Share on TwitterShare on Facebook
• chuckrace6 Magothy River, MarylandMember Posts: 18 ✭

  July 2019

  Do you still have it for sale and what is the shipping on it or is that included?  I'm from Glen Burnie Md. Just outside Baltimore. Thanks
  

  1 · Share on TwitterShare on Facebook
• Dream_Inn Annapolis, MDMember, Moderator Posts: 6,256 mod

  July 2019

  Hey @chuckrace6 - welcome to the forum!  I'm just down the road from you.  
  
  I'm sure @diggin2day1 can make another one for you.  He is our expert with the CNC machine and can make just about anything you desire for the boat.
  

  Dream 'Inn III -- 2008 400 Express

  1 · Share on TwitterShare on Facebook
• chuckrace6 Magothy River, MarylandMember Posts: 18 ✭

  July 2019

  Hi Dream_Inn, I'm going to get a table and a set of Radar Arch lights from him. Just have to make my mind up as to what table I want. They all look great ! Thanks
  

  2 · Share on TwitterShare on Facebook
• GMSLITHO Greenwood Lake NY Member Posts: 1,071 ✭✭✭

  July 2019

  Keith maybe you can make me a sort of hang table 15 in long  about 6 or 7 in wide with round edges ,my thought is to attach it to the back seat in front of where the back table is .When I put the 2 sun cushions obviously there is no table ,this will be almost like a small shelf to put whatever on I bought some brackets that will permanently attach to the back seat with slots in them and the shelf will have brackets that slide into the slots 

  1 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  July 2019

       I made this table in October of 2018 and it’s been sitting in the rack ever since. The amount of work, time and materials made it impossible to sell. So a  few weeks ago I designed and built a slide-out cup holder for it. I brought it down to my boat a few days ago to snap some pictures and accidentally let the admiral see it... Now it’s ours. Lol. 
      It’s made of solid 1.5” thick mahogany with a 1” thick cherry inlaid “waiving” flag. She’s my pride and joy... 

  1 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  July 2019

  @GMSLITHO - Greg, I was actually working on something like this with another forum member... 

  0 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  July 2019

  @GMSLITHO - Greg, I was actually working on something like this with another forum member... 

  0 · Share on TwitterShare on Facebook
• diggin2day1 Long Island, NYMember Posts: 1,273 ✭✭✭✭

  July 2019

  .

  0 · Share on TwitterShare on Facebook
• GMSLITHO Greenwood Lake NY Member Posts: 1,071 ✭✭✭

  July 2019

  That’s a piece of art not a table 

  2 · Share on TwitterShare on Facebook
• Bprus Member Posts: 1 ✭

  September 2020

  Very interested in the round table... are you still making them?

  0 · Share on TwitterShare on Facebook
• GMSLITHO Greenwood Lake NY Member Posts: 1,071 ✭✭✭

  September 2020

  Keith just sold my boat last weekend and had to let the table you made go with it .Ill be in touch soon for a new one Thanks Greg

  0 · Share on TwitterShare on Facebook