Rinker Emblems

davidbrooks

Keep us updated.  I am interested in going in.

Mich350

I need new ones as well.  Count me in.

SimcoeRinker400

So looking at this again today.  What is the most common size everyone has 25" long Rinker writing because it's either 25" long 30 ft and up or 20 " long which I think are the smaller boats?  I am going to measure mine later this week.  Let me know your sizes.

SimcoeRinker400

Hi Guys,

 So I am planning on getting the 25inch ones made and the 9 inch rinker logos.  As that seems the most common on the 28ft and up boats unless someone can tell me different.  And these are exactly what came on the boats.  So they are not stickers but the real logos.  Takes 12 weeks to make.   So I will have 100 to sell of the 25inch Rinker lettering in sets for the side of the boat and 100 9 inch logos each.  

Pricing as follows may go down if I can make a better deal with the company.

Rinker lettering $125 USD per set

Rinker 9 inch logo $45 USD each  $ 80 per set

Now if there is interest in the 20-inch writing and the smaller 7-inch logo I might get them made but its like the captain of a men's league hockey team I am paying upfront for these so ones that do not sell are costing me.  So I would like to know who is really interested.  I might be able to make logo templates as I have a 2006 342, 2006 360 and a 2007 370 in the marina as well as my 2008 400.  

davidbrooks

Def put me in for a set of the 25 in letters and logos.

workforce2573

I want a set of the 25 inch letters and two emblems. Can pay you whenever you get readys. Thanks Brad

SimcoeRinker400

Sounds good everyone I will put the order in will update when I receive the order they are saying 12 weeks.  So around mid-April. 

Mich350

I need new letters and emblem for each side.

cotnerkc

I would be interested in two of the 25” RINKER emblems.  I would also be interested in two of the 9” boat emblem as well.  Please let me know what I need to do.  

SeaHare

interested in both 25" and 9"

SimcoeRinker400

Hi Everyone,

The OEM Logos will be in about 12 weeks.  These are factory Logos.  I have to see what the final costs will be after they are done.  Will update soon.

Cheers,

SimcoeRinker  

cotnerkc

@SimcoeRinker400 Just checking in on the status of the emblems.  I will definitely buy the Rinker and boat emblems.  I would like 2 sets.  

rasbury

pictures of them? Mine is an 06 and in sure a different style..

SimcoeRinker400

06 should be the same.  Probably another 20 days before I get the Logos. They look just like what is on my 400.  Picture of my 400 above.

SimcoeRinker400

Rasbury your boat must be an early 06 as the 06 in my marina has the chrome logos and I have seen other 06's with the chrome logos.  

rasbury

That would look much better than what I have..guess that would be easier to knock off over the 'heavy' decali have. 

SimcoeRinker400

Well, I don't bump my boat into things so I am not to worried about that.  Plus we can get them now which was not an option before.     Big thing with these will be the install.  Clean the Hull with Isopropyl Alcohol then install them.  Same as you would for a chrome logo on a car.  Hope to hear from the manufacture as we get into April.  Also, I can measure the 342 in my marina for you if you are interested.  

RinkerKs2006

@SimcoeRinker400 I would like a set of each as well. How do I order? TIA 

SimcoeRinker400

I will let everyone on here know when they come in later this month and how to order.

SeaHare

Any updates @SimcoeRinker400 ?

SimcoeRinker400

Getting 10 sets in by next week.  

cotnerkc

@SimcoeRinker400 please let us know what payment method you would like.  

SimcoeRinker400

Hi cotnerkc,

It will be an e-transfer after I calculate the shipping for the Logos then send me an e-transfer.  I am setting an email up rinkerlogos@rogers.com which will be up this week.  Hoping to have 10 sets shipped to me by the end of this week.  

Cheers,

SimcoeRinker 400.

RinkerKs2006

@SimcoeRinker400 any updates yet? Thanks!

SimcoeRinker400

The good news today they came in.  So sets in manufacturing means each.  So, Now I know why Rinker charged $185 USD per side.   

This is the pricing as per my new understanding of the sets not pairs.  

Letters per side $125.00 per each USD and plus shipping.
Logo per Side  $45 per each USD and plus shipping.

Whole boat both sides letters  $225.00 USD plus shipping.
Both Sides Logos $80.00 USD plus shipping.

These are OEM Letters and Logos.  I only got 9 sets of letters and 8 sets Logos.  Hope to have the rest in a week or two.  

YYZRC

GLS claims to have almost 2000 of the Rinker boat emblems in stock; might be a smart play to buy some from them in bulk vs having more made by Sharpline.  I imagine they'd be willing to discount given the quantity they have...

SimcoeRinker400

I guess mine are brand new so the adhesive is new too.  Great lake stuff is new old stock.  I looked on their website don't see the Chrome Logos for our boats on their Website.

YYZRC

@Aero3113 have you considered moving the emblems?  I like how they did the RINKER lettering closer to the waterline on the newer models.  Anyone on here have some photoshop skills??

SimcoeRinker400

What boat do you have?  Do you have side shot of our boat and Ill give it a try!  

SimcoeRinker400

Like this ??? That looks lower already?