Waiting for sea tow...

rasbury

It was not slowing me down....on to that dang anchor.

reneechris14

See a couple twists of a screw driver and your good to go.

PickleRick

Screw driver? Use a 5/16 or 8 mm socket and 1/4 inch drive ratchet on those things.  Also any time your install new hose clamps on anything torque them again after a few hours of use.  Dont snug them so hard they strip but they need to be better than flat blade or even Phillips head screw driver tight

This is especially true on charge pipes of a turbo engine although those are usually t bolt clamps.

rasbury

I did....

rasbury

And bought new clamps...10 bucks a piece!

212rowboat

You can buy a T shaped wrench for those worm drive hose clamps that is worth its weight in gold... it has built in maximum torque... using it to remove clamps isn't that efficient, but for installing they cant be beat.   

rasbury

They do seem easy to bust..

GMSLITHO

and a inexpensive fix