Options

REMOVING SOUND SHIELD TO CLEAN FLAME ARRESTOR/ REPLACING SPARK ON NON SERVICE SIDE

SERENDIPITYSERENDIPITY Member Posts: 83 ✭✭
in Engine Discussions
How do i go about it? screws located?  do i remove  one panel at a time and all panels have to be removed ? tks
· Share on FacebookShare on Twitter

Comments

  • Options
    Black_DiamondBlack_Diamond Member Posts: 5,439 ✭✭✭✭✭
    Remove the service panel.
    Remove the top 2 screws on the LH side of the top panel.
    Remove the 2 screws from the top of the side panel.
    The side panel will tilt out to remove.

    If you take out the screw from the front right of the top panel, the top/back panel will tilt back too.

    The screws are finicky to get back in lined up right, just take your time.

    Past owner of a 2003 342FV
    PC BYC, Holland, MI
    · Share on FacebookShare on Twitter
  • Options
    SERENDIPITYSERENDIPITY Member Posts: 83 ✭✭
    TKS AGAIN  BLACK_DIAMOND
    · Share on FacebookShare on Twitter
  • Options
    Black_DiamondBlack_Diamond Member Posts: 5,439 ✭✭✭✭✭
    No problem. I think I know too much about the 5e. 8-}

    Past owner of a 2003 342FV
    PC BYC, Holland, MI
    · Share on FacebookShare on Twitter
  • Options
    SERENDIPITYSERENDIPITY Member Posts: 83 ✭✭
    WELL on the weekend i got the front,left side of the sound barrier off.all the screws are out and the right side.and top side  .cant get them to release .do i punch in the side wall or out?
    · Share on FacebookShare on Twitter
  • Options
    Black_DiamondBlack_Diamond Member Posts: 5,439 ✭✭✭✭✭
    Tilt the top/back cover backwards. The side panel has posts to locate it to the bottom. Should tilt out and pull up.

    Past owner of a 2003 342FV
    PC BYC, Holland, MI
    · Share on FacebookShare on Twitter
Sign In or Register to comment.