Transporting a 2005 342

johnepjohnep Member Posts: 114 ✭✭
My wife and I bought an 05 342 on Cape Cod, Ma.  We are trying to get it transported to New Hampshire were we live.  It is at a residence on blocks and stands.  I will need to have it brought to a marina and put on a sling, then a transport trailer, then off by sling at the local marina.  The boat with the dome is 13' and that seems to be the deal breaker for one hauler to do it all.  Aren't Rinkers tracked to the dealers? Are they all removed by sling?  Just seems a bit crazy to me.  I had my 30' boat transported with no issue and that has the arch and dome as well.  Any ideas on if there is a better way?  The motors are pickled so I cant run it up.  Thanks in advance!

Answers

  • Handymans342Handymans342 Member Posts: 10,375 ✭✭✭✭✭
    edited July 2018
    I had to remove the dome on mine and that was it
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Mr. HANDY is correct. They can pick it up off the blocks and haul to NH. I have mine hauled home for winter, unbolt dome and stand and strap under arch. I have blocks and stands at home to get it off the trailer.
    2005 Rinker FV342  Pawcatuck river,Ct
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭

    2005 Rinker FV342  Pawcatuck river,Ct
  • Handymans342Handymans342 Member Posts: 10,375 ✭✭✭✭✭
    That would look better on a lift
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    I can park beside yours and we can compare. Lol gasser goes faster. 
    2005 Rinker FV342  Pawcatuck river,Ct
  • McGarnicleMcGarnicle Member Posts: 260 ✭✭✭
    You just need to find someone with a hydraulic trailer, they will come lift it off the blocks onto the trailer and transport it. They can then put it back on blocks, launch it via ramp or have your marina lift it with a sling. This was how mine was transported and only needed to remove the stuff on the arch. 
  • johnepjohnep Member Posts: 114 ✭✭
    I wish.  I am having a hard time believing it can be this difficult.  Plus, I can not get most of the haulers I have called and e-mailed to even get back to me.  This is just plan crazy and very frustrating.  Many of them must be on vacation or something.  Anyone lowered the arch? That may be next plan to get it well below the 13'
  • jbschmalz23jbschmalz23 Member Posts: 219 ✭✭✭
    edited July 2018
    Some years offered a hinged arch. Not sure on the 342s but have noticed it on several models. With taking all the equipment off the arch for transport you should be ok though. As long as the transport co. uses the low profile trailer set ups. There should be a good bit of them out there that could transport it. You’re tough part may be getting the proper transport to get it off the blocks and onto a trailer if it’s parked at a residence currently. Did I read that right? Did you reach out to the co. that transported it to where it is now? 
  • earl1z19earl1z19 Member Posts: 380 ✭✭✭
    How did the old owners get it there? Maybe try that company to get it to a marina with a hoist and go from there.
  • johnepjohnep Member Posts: 114 ✭✭
    I have called and e-mailed the company that brought it to his home.  No word back yet....
  • DanD2DanD2 Member Posts: 848 ✭✭✭
    I have mine hauled home every year. Radar dome will definitely have to be removed. My marina has a hydraulic trailer and could haul that for you. Not sure of the cost as they are in Naples Maine, but give them a call. Contact Marc at Moose Landing Marina (207) 693-6264
    No longer a boat owner.....previous boat - 2005 Rinker Fiesta Vee 342
  • johnepjohnep Member Posts: 114 ✭✭
    Ended up finding a real boat hauling company in NH. They went down and brought it up on a hydraulic trailer.  No issues at all!  What a bunch of deadbeat haulers there are in Massachusetts. Trying to over charge and make thing much more difficult then needed. Glad to have her home so I can start getting her ready!
  • jbschmalz23jbschmalz23 Member Posts: 219 ✭✭✭
    Is that her in the profile pic? Good looking boat. I like the color! 
  • johnepjohnep Member Posts: 114 ✭✭
    It is! A week of buffing and waxing and I have done the rub rail down. Now the interior, then on the trailer, the upper deck, and cabin. I am thinking of a 2020 launch date! :)
  • jbschmalz23jbschmalz23 Member Posts: 219 ✭✭✭
    Haha! Share some pics of the progress! 
  • johnepjohnep Member Posts: 114 ✭✭
    It's floating so I guess I am headed in the right direction!  My first run today went pretty well.
  • johnepjohnep Member Posts: 114 ✭✭
  • randy56randy56 Member Posts: 4,085 ✭✭✭✭✭
    Sweeeeeet
    Boat Name : 

  • Liberty44140Liberty44140 Member Posts: 4,414 ✭✭✭✭✭
    Nice!
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

  • Dream_InnDream_Inn Member, Moderator Posts: 7,922 mod
    She looks great & in beautiful shape!

    Dream 'Inn III -- 2008 400 Express

  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Push the thoddles all the way forward. B)B)
    2005 Rinker FV342  Pawcatuck river,Ct
Sign In or Register to comment.