removing cloth speaker cover

Comments

• Options

  LaRea Member, Moderator Posts: 7,560 mod

  September 2020

  On mine, they just pry off.  The frame has plastic nubs that fit into holes in the laminate.
  
  Be gentle; the plastic is brittle.  

  0 · Share on FacebookShare on Twitter
• Options

  Cableguy Greg Member Posts: 5,013 ✭✭✭✭✭

  September 2020

  Small flat head screwdriver to get it started. They are mounted with the super Velcro that holds the mirror on at the front of the boat hiding the anchor locker. 

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
  Go Steelers!!!
  

  0 · Share on FacebookShare on Twitter
• Options

  Spyderweb Member Posts: 880 ✭✭✭

  September 2020

  @Cableguy Greg oh, I know about the super velcro under the mirror.  If that's what's holding the speaker cover I'm a little bit afraid of damaging that cloth trying to tear it away.

  0 · Share on FacebookShare on Twitter
• Options

  Cableguy Greg Member Posts: 5,013 ✭✭✭✭✭

  September 2020

  Once you get it out a little bit, work it with your fingers and it will let loose. 

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
  Go Steelers!!!
  

  0 · Share on FacebookShare on Twitter
• Options

  YYZRC Member Posts: 4,919 ✭✭✭✭✭

  September 2020 edited September 2020

  No nubs or Velcro on mine. Just friction fit. 

  
  

  
  

  
  

  
  

  2008 350 EC on Georgian Bay

  0 · Share on FacebookShare on Twitter
• Options

  Spyderweb Member Posts: 880 ✭✭✭

  September 2020

  Got to boat yesterday and cabin speaker was working.  Took pressure off for removing speaker cover.  Still tried to pry it a little, and she’s on there tight.  Afraid of damaging the cloth covering.  Will hold off on this one till speaker really dies again.

  0 · Share on FacebookShare on Twitter
• Options

  YYZRC Member Posts: 4,919 ✭✭✭✭✭

  September 2020

  It is on there very tight. 

  2008 350 EC on Georgian Bay

  0 · Share on FacebookShare on Twitter