Oil Change method

Pat310Pat310 Member Posts: 603 ✭✭✭
Who removes their oil through the dip stick and who uses the hose attached to the oil pan drain?

Best Answers

Answers

  • Aqua_AuraAqua_Aura Member Posts: 2,702 ✭✭✭✭✭
    Dipstick for me. Never seen a hose on the pan. 
    1997 Bayliner 3988
  • YYZRCYYZRC Member Posts: 5,405 ✭✭✭✭✭
    Planning to do dipstick method in the spring. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    this is good friend or pump on a drill. The treads on the dip stick are the same as a garnden hose
    2005 Rinker FV342  Pawcatuck river,Ct
  • Aqua_AuraAqua_Aura Member Posts: 2,702 ✭✭✭✭✭
    I also use the topsider. My threaded portion on the dipstick isn't sealed very well on the dipstick so I need to seal it better. Maybe just some RTV silicone. 
    1997 Bayliner 3988
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    I use the drill use fresh oil to prime.it is much faster then the topsider but the top side gets more out. A hose washer should help with the sealing of the hose. 
    2005 Rinker FV342  Pawcatuck river,Ct
  • Pat310Pat310 Member Posts: 603 ✭✭✭
    Just wondering how much oil is left behind using dipstick?  Switching to synthetic and want to get out as much as I can. When you refill how close to the listed capacity does it take?
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Gotcha 
    2005 Rinker FV342  Pawcatuck river,Ct
  • JimGuy341JimGuy341 Member Posts: 108 ✭✭
    Just did the dip stick method.  Listed capacity is 4.5 quarts w/ filter change.  Added 4 quarts.  So only about a 1/2 quart left behind.  I just switched to synthetic too.
    2008 350 EC
Sign In or Register to comment.