Imbedded Mold In Gel Coat

aero3113aero3113 Member Posts: 9,774 ✭✭✭✭✭

Has anyone ever had this? First time for me. At the bow mold seems to be imbedded in the gel coat. I washed it and it didn’t do much. I used hull cleaner and it barely did anything. It must be from where the shrink wrap was up against and was getting wet. Maybe a few days in the sun will take care of it?


2008 330EC

Comments

  • YYZRCYYZRC Member Posts: 5,416 ✭✭✭✭✭
    Rubbing compound will get it. I have the same every year in places. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • aero3113aero3113 Member Posts: 9,774 ✭✭✭✭✭
    Thanks @YYZRC !
    2008 330EC
  • mattiemattie Member Posts: 1,322 ✭✭✭✭
    @aero3113
    Could even lightly wet sand if the compound doesn't work first.
    Then polish.
     
    246BR, 276BR, H310BR current
  • aero3113aero3113 Member Posts: 9,774 ✭✭✭✭✭
    Thanks @mattie !
    2008 330EC
  • aero3113aero3113 Member Posts: 9,774 ✭✭✭✭✭
    I looked at it today and I think it lightened up a little bit. 
    2008 330EC
  • MarkBMarkB Member Posts: 4,009 ✭✭✭✭✭
    Agreed. Compound ... if that doesn't work, wet sand with a very find sand paper, then polish, and wax.

    Boat Name: King Kong

    "Boat + Water = Fun"

  • aero3113aero3113 Member Posts: 9,774 ✭✭✭✭✭

    Collinite cleaner wax took it off with a nice coat of wax on top.


    2008 330EC
  • PickleRickPickleRick Member Posts: 4,341 ✭✭✭✭✭
    I have a product I use for heavy mold stains.  It's cheap but it will eat or discolor wax.   Store brand bathroom cleaner with bleach.   Try to use it out of direct sunlight, spray it on and scrub it in with brush. Let it soak as long as possible before it starts to dry so small areas at a time.  Apply a little water, srub a little more depending on how bad it is and rinse off .   Reapply if needed.  

    Also works great on the headliner my monkey fur stains. Spray on them work in with a sacrificial towel.  Shop vac dry.  

    Walmart, dollar general, family dollar etc. 
Sign In or Register to comment.