New canvas issue

Comments

• rasbury Member Posts: 8,230 ✭✭✭✭✭

  March 2017

  What's the problem? The symbol?

  0 · Share on FacebookShare on Twitter
• BellevilleMXZ Member Posts: 732 ✭✭✭

  March 2017

  GREAT guy to deal with, can't say enough, I'm sure he will fix you up....Looks like a newer and older ?

  2005 Rinker 270 FV Volvo Penta 5.7Gi

  0 · Share on FacebookShare on Twitter
• gack Member Posts: 315 ✭✭✭

  March 2017

  Yeah,  2 different logos.  I sent TJ an email,  I'm sure he'll take care of it. BTW, Anyone have advice on installing the snaps?  I figure I would start at the windshield center and work my way back. 

  0 · Share on FacebookShare on Twitter
• Liberty44140 Member Posts: 4,329 ✭✭✭✭✭

  March 2017 edited March 2017

  Yep, get the front connector zipped in and then mark the snap spot with a marker. start in middle. I did 3 or 4 at a time but no more. You need a snap install die and punch. They are cheap. Easy to use soldering iron to pinch hole 

  07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)
  
  

  0 · Share on FacebookShare on Twitter
• gack Member Posts: 315 ✭✭✭

  March 2017

  Thanks for the tip using soldering iron.   What diameter hole did you make? About 1/4 inch?

  0 · Share on FacebookShare on Twitter
• Liberty44140 Member Posts: 4,329 ✭✭✭✭✭

  March 2017

  No, the "rod" for the snap is more like 1/16-1/8 and my soldering iron is that narrow. The width of a roofing nail is around the hole size.

  07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)
  
  

  0 · Share on FacebookShare on Twitter
• gack Member Posts: 315 ✭✭✭

  March 2017

  Thanks Lib.  Just heard back from Tj.  He's going to get me a new bimini boot.

  1 · Share on FacebookShare on Twitter