Horizon 600 windless

danroddanrod Member Posts: 27 ✭
in Rinker Express Cruisers Forum
I have a 2008 280 and the control arm on the Horizon 600 Windless was not working so I fond one on eBay. Does any one know how to replace it so the tension on the spring is placed correct? 
· Share on Facebook

Comments

  • DanD2DanD2 Member Posts: 848 ✭✭✭
    Not sure if this will help you out. If not, at least you now have a manual.
    No longer a boat owner.....previous boat - 2005 Rinker Fiesta Vee 342
    · Share on Facebook
  • danroddanrod Member Posts: 27 ✭
    Hey DanD2 thats great thanks for this.
    · Share on Facebook
  • Liberty44140Liberty44140 Member Posts: 4,414 ✭✭✭✭✭
    My arm was not pressing down like it should, I removed it and the spring and greased the spring with some sae 30 I had on hand, then put back together. All good for 3 seasons 
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

    · Share on Facebook
  • Dude_HimselfDude_Himself Member Posts: 596 ✭✭✭
    The control arm spring doesn't have a lot of tension - I though mine was bad and swapped for a new one, and $50 later it's nearly identical in feel and operation. Going to need a new rode soon.
    · Share on Facebook
Sign In or Register to comment.