Doral 330se

12346»

Comments

  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    Have a leak behind the helm and this trashed the head board thing so took it home and rebuilt it couple of times almost gave up thinking it was a lost cause but powered though. I think it came out pretty good. Now back to the motor.the 1st pic was how it started didn't look so bad until I started taking it apart.
    2005 Rinker FV342  Pawcatuck river,Ct
  • Handymans342Handymans342 Posts: 10,375 ✭✭✭✭✭
    What was leaking?
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    Drain behind the helm, someone gouped it up with some crap like plumbers putty on the outside of it, thinking it is like a thru hull fitting remove and reseal. Have not fixed that yet, need to wait for some warmer weather. Will be very hard reach.
    2005 Rinker FV342  Pawcatuck river,Ct
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    The second pic it is in the top left corner. White corrugated hose and it about 18 inches to a thru hull over board.
    2005 Rinker FV342  Pawcatuck river,Ct
  • randy56randy56 Posts: 4,085 ✭✭✭✭✭
    Nice rebuild of cabinets.
    Boat Name : 

  • LaReaLaRea Posts: 8,069 mod
    OK so looking at the cabinets, the badness was on the left?   Looks like you were able to save most of the laminate, which is fortunate.  Or did you save all of the laminate?
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    edited February 2021
    LaRea said:
    OK so looking at the cabinets, the badness was on the left?   Looks like you were able to save most of the laminate, which is fortunate.  Or did you save all of the laminate?
    Just had to relaminate the top of the bottom cabinet the rest was saved. For the white I used a vinyl wrap as it was inside the compartments.
    2005 Rinker FV342  Pawcatuck river,Ct
  • SpyderwebSpyderweb Posts: 959 ✭✭✭
    Impressive!  Nice job.
  • Liberty44140Liberty44140 Posts: 4,414 ✭✭✭✭✭
    Looks great! She is coming along nicely 
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    port motor coming along forget that cabinet I have work to do!!
    2005 Rinker FV342  Pawcatuck river,Ct
  • Aqua_AuraAqua_Aura Posts: 2,705 ✭✭✭✭✭
    Yeah that cabinet isn't gonna be much good in a boat that doesn't move. 
    1997 Bayliner 3988
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    #2 or port motor coming along nicely. Looks like I'm staying on schedule couple weeks and I will paint the bilge. Shooting for 1st week in April to install motors then a couple weeks to get them all set up. Lauch some time in may.
    2005 Rinker FV342  Pawcatuck river,Ct
  • earl1z19earl1z19 Posts: 380 ✭✭✭
    VP does some things that just make sense like the remote oil filter that is easy to get at and not upside down. Their water pump is in a place that makes sense as well. Motors are looking good!
  • Handymans342Handymans342 Posts: 10,375 ✭✭✭✭✭
    Nice work Chris. Renee called me and said she feels very neglected 
  • LaReaLaRea Posts: 8,069 mod
    How are you painting the engine blocks?  Brush, rattle-can? 

    My boat is looking at these pictures and saying "what am I, chopped liver?"
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    Nice work Chris. Renee called me and said she feels very neglected 
    Steve its her boat and I'm cheap labor.
    2005 Rinker FV342  Pawcatuck river,Ct
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    LaRea said:
    How are you painting the engine blocks?  Brush, rattle-can? 

    My boat is looking at these pictures and saying "what am I, chopped liver?"
    Rather can for the most part and touch up with brush. Wire wheel for all bolts and threads so all goes back together easy.
    2005 Rinker FV342  Pawcatuck river,Ct
  • Handymans342Handymans342 Posts: 10,375 ✭✭✭✭✭
    Nice work Chris. Renee called me and said she feels very neglected 
    Steve its her boat and I'm cheap labor.
    LOL
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    motors are in and running great enjoyed going for a nice joy ride today.
    2005 Rinker FV342  Pawcatuck river,Ct
  • aero3113aero3113 Posts: 9,821 ✭✭✭✭✭
    Awesome @reneechris14 , she looks great!
    2008 330EC
  • aero3113aero3113 Posts: 9,821 ✭✭✭✭✭
    I see you have a grab rail on the middle of your arch. Do you have enough room to walk to the bow from the outside?
    2008 330EC
  • LaReaLaRea Posts: 8,069 mod
    Running great means how many mph in that boat?  About 47?
  • Handymans342Handymans342 Posts: 10,375 ✭✭✭✭✭
    Looks good Chris
  • randy56randy56 Posts: 4,085 ✭✭✭✭✭
    lookin good, that was a lot of work to get there.
    Boat Name : 

  • Liberty44140Liberty44140 Posts: 4,414 ✭✭✭✭✭
    Nice!! Looks great 
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    aero3113 said:
    Awesome @reneechris14 , she looks great!
    Yes there is room, there is also a grab rail on top of the back seat behind the canvas. Steps going up from the platform are a little sketchy but you can have hand on some part as you head up. Took it mystic for lunch yesterday.
    2005 Rinker FV342  Pawcatuck river,Ct
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    LaRea said:
    Running great means how many mph in that boat?  About 47?
    Think it may need to be repropped get more top end. 5mph to 25mph in 4 seconds with 3/4 fuel full water and 5 adults. Only brought it up to 4400rpm 36mph, the admiral said don't hurt it. Lol. 2.2 hours on her now. Props are 19x 18 pitch. 
    2005 Rinker FV342  Pawcatuck river,Ct
  • reneechris14reneechris14 Posts: 3,134 ✭✭✭✭✭
    Looks good Chris
    randy56 said:
    lookin good, that was a lot of work to get there.
    Nice!! Looks great 
    Thanks guys it was alot of work.
    2005 Rinker FV342  Pawcatuck river,Ct
  • aero3113aero3113 Posts: 9,821 ✭✭✭✭✭
    edited May 2021
    @reneechris14  Nice! , we were at the Maritime museum there yesterday.


    2008 330EC
  • Liberty44140Liberty44140 Posts: 4,414 ✭✭✭✭✭
    Very cool!!!
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

Sign In or Register to comment.