Best Of
Re: Obtaining maximum speed
What’s your max RPM?
If you are looking for more speed, most everyone on here will recommend the Hill Marine props, myself included. They give great stern lift.
If you are looking for more speed, most everyone on here will recommend the Hill Marine props, myself included. They give great stern lift.
YYZRC
1 ·
Re: Obtaining maximum speed
Also, not trimming the drives and tabs correctly or something wrapped around the props.
aero3113
1 ·
Re: Stock Market
Remember, if you take it at a good profit, don't worry about missing out on the top. Because it will go back down and go really fast. I also don't play those Meme stocks cause my stomach can't take it. The day I put money in AMC I'll let you all know. Cause that will be the day to get out of it!PickleRick said:Id hate to sell AMC only to see see them hit 200. Im at work all day so it's hard to watch the stocks until after they xlsoe
That said, just yesterday I'm up $9.9k. It is of course long term, so I'm sure it'll go back down a little too. What I call my dividend stocks have really been doing awesome. These are BGS, NRZ, IBM, NLY, FDUS, SUN, HTGC, T, ENB, EPD, & MPLX. I'm up 14.7% and that is the average of starting a little in December and sprinkling it in since. So really just a few months worth. That also does not include the 6, 8 or even 10% dividends I'm getting! AMAT is still doing crazy great too! Some of my higher risk, RIDE, CCIV, CELZ, RKT, well, they got a lot better recently.
Somewhere down the road this is all gotta have a big correction, right? I'm keeping some powder on the side for the long term if that larger correction happens. Putting it in then will be the only thing that helps me stay sane thru it.
Dream_Inn
1 ·
Re: Obtaining maximum speed
And by maximum speed do you mean engine RPM or speed over water? I think the important question is are you getting max RPM's out of both engines.
Willhound
2 ·
Re: I have 05 Rinker 250, it idles fine but when i give it gas it conks out and i cant start it for 1hr
Replace your main fuel filters and inline filters if you have them. There’s a chance that the inline filters are so clogged it takes that long for fuel to dribble though and your able to start again.
aero3113
1 ·
Re: Can you tell me what this line is for?
I was wondering the same thing! So I can suck oil from this line?
YYZRC
1 ·
Re: I have 05 Rinker 250, it idles fine but when i give it gas it conks out and i cant start it for 1hr
Joe, here is a place to start.
There is a big check list,
Starving for fuel, fuel pump? Filter? , good connection on main electric plug and connection. IAC valve. cut off switch at throttle/ shifter connected correct. Spark plugs?
was the engine fogged at winterize?
Old fuel? water in fuel?
There is a big check list,
Starving for fuel, fuel pump? Filter? , good connection on main electric plug and connection. IAC valve. cut off switch at throttle/ shifter connected correct. Spark plugs?
was the engine fogged at winterize?
Old fuel? water in fuel?
randy56
1 ·
Re: Exhaust Y
Yep, tuff one...what makes you think it's there and not one of the hundreds (jk) of other places our boats have? That's way down in the bottom...would be very hard to tell- for sure have to pull the motor
rasbury
1 ·
