Rinker 330/340 2008+ Random Topics

1…1718202223…27

Comments

  • YYZRCYYZRC ✭✭✭✭✭
    @aero3113, which of your port side outlets is GFCI? None of mine are and that’s concerning for the head...
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    The one by the forward V birth step.
    2008 330EC
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Thanks! Mine is not  :# 

    Any progress on your step compartment?!
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    I want to do it but I’ve been having second thoughts. With the bins on the starboard side shelf and under the couch, we’ve been doing pretty well with storage.
    2008 330EC
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    How about your cabinets!!?
    2008 330EC
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Hoping for this week!  I'm tried of boating with bungee cords holding the microwave in place! 
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    @LaRea, what do you recommend for settings for the factory Clarion amp with no subwoofer?  I'm trying to figure out the x-over and gain settings.  Thanks!


    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Any recommendations on what type of adhesive to use to reinstall the sensatank sensors?
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • LaReaLaRea mod
    With no sub-woofer, set both sides to:
    X-OVER MODE = OFF
    X-OVER FREQ = (not used)

    In case other readers are curious:

    The crossover is only used with a subwoofer.  You'd set the crossover mode to LPF (low-pass filter), meaning it only sends low frequencies to the subwoofer. 

    If one side of the amp has regular speakers, you'd set the crossover mode on that side to HPF (high-pass filter), meaning it only sends high frequencies.  Or you might set it to OFF so it sends the full signal.  

    The FREQ adjustments change the cutoff frequency.  You'd probably just set them in the middle, and then tweak them to see what sounds best.  
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Thank you @LaRea ! What do you recommend for gain settings and what does it do?
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • LaReaLaRea mod
    Start by setting the gains at the 12 o'clock position.  If the speakers on the "front" channel are louder or quieter than the ones on the "rear" channel, you can use the gains to equalize them.  

    Then, if you want a little more volume, you could try increasing the gains.  If you go too high, you might hear some distortion, and then you'll know to back off a little. 

    On the bass boost, it all depends on your speakers and how you like your music.  
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    edited September 2020
    I pulled the amp out and set everything as you suggested @LaRea - the hum was still present so I dropped the gain down to zero and now everything is perfect. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    @YYZRC , now we both owe @LaRea drinks!!
    2008 330EC
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Agreed!! I hope we can all agree on Hendricks...

    Also @aero3113 - cabinet guy just let me know that the cabinet panel is ready!! Going to pick it up now, hopefully it fits!
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • reneechris14reneechris14 ✭✭✭✭✭
    @aero3113 I'm heading to long Island monday Greenport I know not close to you but it is long Island. 
    2005 Rinker FV342  Pawcatuck river,Ct
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    @YYZRC can’t wait to see it!
    2008 330EC
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    @reneechris14 , How long will you be out there? It’s not too far by car from us. 
    2008 330EC
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    edited July 2020
    When trying to get up on plane my boat struggles and sounds like it’s cavitating badly. Especially starboard. The sound is very distinct but hard to describe - almost like I’m towing a parachute. I can’t get over 4000 rpm until it planes. Normal?
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    Make sure your drives are trimming all the way down and not hanging up. Check by eye if you can, not the gauges.
    2008 330EC
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    They’re fully down for sure!
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • LaReaLaRea mod
    YYZRC said:
    Agreed!! I hope we can all agree on Hendricks...
    Hendricks it is.  Gonna take me a while to get to Georgian Bay, but I will collect!
    · Share on Facebook
  • SpyderwebSpyderweb ✭✭✭
    YYZRC said:
    When trying to get up on plane my boat struggles and sounds like it’s cavitating badly. Especially starboard. The sound is very distinct but hard to describe - almost like I’m towing a parachute. I can’t get over 4000 rpm until it planes. Normal?
    Mine is similar.  I ease into the throttle very slowly, trying to avoid it.  Putting on the patching 22P props may have helped a bit this year too.
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    LaRea said:
    YYZRC said:
    Agreed!! I hope we can all agree on Hendricks...
    Hendricks it is.  Gonna take me a while to get to Georgian Bay, but I will collect!
    Meet in the middle? Not sure where that is but I’m game for an adventure...

    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    aero3113 said:
    How about your cabinets!!?
    In progress!!


    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    Looks great!
    2008 330EC
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Any suggestions on where to get another nickel whisper latch? I’m struggling to find the same design. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • RobinbanksRobinbanks ✭
    Ever sort the plane problem?
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Robinbanks said:
    Ever sort the plane problem?
    From what I gather it is “normal” for this hull. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • YYZRCYYZRC ✭✭✭✭✭
    Relocated the radio control to replace the macerator switch. 


    2006 390 EC
    2008 350 EC
    Georgian Bay
    · Share on Facebook
  • aero3113aero3113 ✭✭✭✭✭
    What did you put in place of the old control location?
    2008 330EC
    · Share on Facebook
Sign In or Register to comment.