For anyone who is trying to match 13 year old faded 330/350 gel coat using Spectrum Patch Paste, I found that mixing a small amount of Rinker Sand White with the Rinker White White makes for a great match.
For anyone who is trying to match 13 year old faded 330/350 gel coat using Spectrum Patch Paste, I found the perfect mix is approx 1/2 Rinker Sand White and 1/2 Rinker White White.
Additionally, the head/shower stall are Sand White.
I have a quarter size gouge in my gelcoat and a yards worth of battle scars behind it. Not sure how much of this combo I would need on my 05 360 FV, which likely is the same colors
Built a collapsing backrest for the bow lounger. I don’t have @larea or @rando3113 skills but I think this will work. Would have preferred regular (not non-skid) starboard for the project but this is what they had in stock.
I will reduce the thickness of the foam in the cushion by 1.25” to account for the backrest underneath.
I had a cover made so I leave the cushions on the bow. I might add a strap with some domes to hold it down though in the event that the cushions are stowed.
Port wiper motor is easy to remove as its above an access panel in the head. I might do it - just wish it wasn’t non-skid there or I could fill the hole perfectly.
They do sit a little high, but I'm probably the only one bothered by it. The Admiral didn't even notice I took off the wiper. I'll try to get a pic tomorrow so you can see how it fits.
Comments
'05 Rinker 360 Fiesta Vee
Got a chrome cap from Amazon...
https://www.amazon.com/dp/B01KSKZLFA
Port wiper motor is easy to remove as its above an access panel in the head. I might do it - just wish it wasn’t non-skid there or I could fill the hole perfectly.