How did this happen!!!!

1246

Comments

  • LaReaLaRea Member, Moderator Posts: 8,069 mod
    If you are considering USCG documentation, the letters for port of call have to be a minimum of 4" tall -- even the lower-case letters.  Change them to all caps.  And I agree about taking out the comma and periods.  Simplify!
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    I don’t think I’m going to document the boat but here’s the requirements if I were to.

    https://www.boatus.com/boatgraphics/uscg-requirements.asp


    2008 330EC
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    The buyer of my 242 sent me some pics of her all waxed up and bottom painted. Nice to see she’s in good hands. He thinks he found someone that will get him in the water next week. Curious to see it this is possible.



    2008 330EC
  • IanIan Member Posts: 3,062 ✭✭✭✭✭
    My marina where stored are essential as they have gas, support DEC and the Sheriff vessels. He's moving me out soon into the yard -yay! - but no pleasure crafts can be launched. 

    Regards,

    Ian

    The Third “B”

    Ravena Coeymans Yacht Club

    https://www.rcyachtclub.com/

  • Aqua_AuraAqua_Aura Member Posts: 2,705 ✭✭✭✭✭
    Is the new owner gonna join the forum? 
    1997 Bayliner 3988
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    Aqua_Aura said:
    Is the new owner gonna join the forum? 
    I told him about the forum multiple times. 
    2008 330EC
  • TonyATonyA Member Posts: 93
    Very Nice! 
    2008 Rinker 400EC Longport NJ
  • GMSLITHOGMSLITHO Member Posts: 1,618 ✭✭✭✭
     Always nice when you sell something that you took care of for years is sold to someone that take care of it the same way 
  • rasburyrasbury Member Posts: 8,962 ✭✭✭✭✭
    Yep...I usually find I do stuff better than PO on stuff I buy...
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    The buyer of my 242 sent me these pictures today. He did a boat by in the 242 and took a couple of pics of the 330. I must’ve just missed him when I was down there. He’s been very happy with the 242  :) .



    2008 330EC
  • PickleRickPickleRick Member Posts: 4,371 ✭✭✭✭✭
    edited May 2020
    He's snapping pics of his next new boat...we all know you'll run out of repairs and upgrades then you'll move up to a bigger rinker. 😊
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    LoL!! 
    2008 330EC
  • Liberty44140Liberty44140 Member Posts: 4,414 ✭✭✭✭✭
    Boat looks great!
    07' Cruisers 390 (Previous Rinker's: 06' 342EC & 01' 310FV)

  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    Thank you @Liberty44140 !
    2008 330EC
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Really like the clean look with now stripes. He should have parked beside the 330 so you could see have much you stepped up. Then he could of signed the purchase agreement.
    2005 Rinker FV342  Pawcatuck river,Ct
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    Thank you @reneechris14 . That would’ve been a great picture to get.
    2008 330EC
  • PickleRickPickleRick Member Posts: 4,371 ✭✭✭✭✭
    A 242 could nearly rest on the davids of a 330!  That's a big beamy yacht....shes well past a boat.  If the old crazy captain that was hunting jaws had been on a 330, the line "We're gonna need a bigger boat" would have never made it into the movie.



  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    edited May 2020

     So @PickleRick , should I throw this out or keep it just in case??


    2008 330EC
  • TonyG13TonyG13 Member Posts: 1,438 ✭✭✭✭
    Keep it!! You can ALWAYS use a bigger boat! LOL
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    I like the way you think @TonyG13
    2008 330EC
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    edited May 2020
    Seemed like she liked 3800-4000 RPM’s to cruise Between 28-30 MPH. It was windy and a little choppy so will see what she does on a better day. I cannot be happier with twins! Docking was amazingly easy!! Barely used the wheel.


    2008 330EC
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Yup thats cruise speed do I see that right tach say 37 -32 hours???
    2005 Rinker FV342  Pawcatuck river,Ct
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    @reneechris14 they actually say 3.7 and 3.2  :D . When I installed the new panels and gauges, they started at 0 . 
    2008 330EC
  • reneechris14reneechris14 Member Posts: 3,134 ✭✭✭✭✭
    Oh I get it new to me. Did you like the ride of the bigger boat. It was a huge difference for me going from the 270 at 7250# to the 342 at 14250# 
    2005 Rinker FV342  Pawcatuck river,Ct
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    @reneechris14 , Yes! We would’ve been beaten up in the 242 today. It really handled well. I told my wife when we were at anchor that the wind is picking up and is only going to get stronger as the day goes on. I said that if we were in the 242 I would be nervous thinking about the trip back and docking, I was at ease being on the 330. Huge difference. My 242 was around 5000 lbs, the 330 is a little over 14000 lbs. I can’t wait to get back on it now that we have mostly everything sorted out and in its proper places.
    2008 330EC
  • YYZRCYYZRC Member Posts: 5,464 ✭✭✭✭✭
    Did you have the drives trimmed all the way down, or trim gauges not working?
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    @YYZRC they were trimmed down.
    2008 330EC
  • Aqua_AuraAqua_Aura Member Posts: 2,705 ✭✭✭✭✭
    Fuel gauges all working properly now?
    1997 Bayliner 3988
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    I’m not 100% yet, port still might be hanging up. I’m going to go top it off again and see what it does. Both gauges are reading even now after I burned some fuel. Rinker replied to my email and gave me a part number of 240199A . 
    2008 330EC
  • aero3113aero3113 Member Posts: 9,853 ✭✭✭✭✭
    This marine advisory was issued at 4:39 yesterday, we pulled into the slip at 4:31 😅. I still don’t think we would’ve had any issues if we were in the worst of it.


    2008 330EC
Sign In or Register to comment.