Rinker Rinker Fiesta 360 2005-2006 Random Topics

tricountytrailtricountytrail Member Posts: 253 ✭✭
edited June 2023 in Rinker Express Cruisers Forum
Rinker 360 Topics lightly different layout and floorplan.
I have a 2005 Rinker Fiesta Vee 360 These are slightly different from the other versions Foldable radar arch, stern door on starboard side, Length 39' 4" Beam 12' 3" separate forward stateroom.
Fuel Tank Capacity (gal): 235 gallons
Water Tank Capacity (gal): 51 gallons
Waste 45 gal.


· Share on Facebook

Comments

  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Looking for Snap in carpet for my 2005 Rinker Fiesta Vee 360.
    Wondering if anyone has any suggestions or pictures.
    · Share on Facebook
  • LaReaLaRea Member, Moderator Posts: 8,056 mod
    edited June 2023
    I'm pretty sure your 360 is identical to my 2007 370.  In April 2021, I got carpets from snapincarpet.com using a template that I made.  They don't list the 360 or 370 in their catalog of templates, but maybe they could cut another set from my templates.  If you want to ask them, the order number was S7212.  
    · Share on Facebook
  • YYZRCYYZRC Member Posts: 5,396 ✭✭✭✭✭
    Do you still have the original carpet? I bought some nice “Infinity Weave” and traced the original carpet onto it. Had a local carpet shop put binding on it and I’m super happy!
    2008 350 EC on Georgian Bay
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    I do not, I could make a template, but would love to find a precut one.
    · Share on Facebook
  • YYZRCYYZRC Member Posts: 5,396 ✭✭✭✭✭
    I did this for about $400. I hated how everyone makes the flooring in 17 pieces. Mine is two. 




    2008 350 EC on Georgian Bay
    · Share on Facebook
  • echandler1971echandler1971 Member Posts: 244 ✭✭✭
    I've got an '05 360 as well. I have the original snap-in carpets and would love new ones. I also want to know what people have done for curtains on their cabin windows.
    Dan of Steel
    '05 Rinker 360 Fiesta Vee
    · Share on Facebook
  • echandler1971echandler1971 Member Posts: 244 ✭✭✭
    YYZRC said:
    I did this for about $400. I hated how everyone makes the flooring in 17 pieces. Mine is two. 

    Who did you go with?
    Dan of Steel
    '05 Rinker 360 Fiesta Vee
    · Share on Facebook
  • YYZRCYYZRC Member Posts: 5,396 ✭✭✭✭✭
    I made it myself. Ordered a bulk roll from https://marinevinylfabric.com/ and traced the original carpets onto it. Cut it out and had a local canvas shop sew on Sunbrella binding. 
    2008 350 EC on Georgian Bay
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Just ordered my carpet making template and cutting hopefully this weekend.
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Have to do a final trim then get them bound and install snaps.


    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,759 ✭✭✭✭✭
    Nice job @tricountytrail 👍🏻⚓️
    2008 330EC
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Looking for rear seat cockpit filler cushions or even info or part numbers, Rinker Fiesta Vee 360. Pics are for example.

    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    My 360 with 3 cover options.


    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Boat is hauled and ready for the winter projects.

    · Share on Facebook
  • LaReaLaRea Member, Moderator Posts: 8,056 mod
    That's a lotta boat to put on a 2-axel trailer!
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    It is a hostar rated transport trail trailer all hydraulic. I believe 30,000 lbs


    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Anyone have any autopilot install experience? I am wondering what type of actuator I would need with twin mercruiser i/os?  Would it use its own steering pump or the existing one? I have the Simrad plotter wondering what else I need?
    · Share on Facebook
  • YYZRCYYZRC Member Posts: 5,396 ✭✭✭✭✭
    edited November 2024
    https://rinkerboats.vanillacommunities.com/discussion/6500/autopilot-installation-on-370

    I use the GO12 with a NAC-2, Precision 9 compass and an Octopus Type R drive. 

    Don’t buy the Octopus rudder sensor, it is garbage. Get the Simrad. 

    I mounted the NAC-2 on the bulkhead and the Octopus between the stringers. 


    2008 350 EC on Georgian Bay
    · Share on Facebook
  • LaReaLaRea Member, Moderator Posts: 8,056 mod
    What he said.  The Octopus Type R is an electric actuator that attaches to the steering ram.  There's no connection to the hydraulics.  And if something breaks, you can easily disconnect the actuator by pulling one pin.  (I used them for about 15 years on two boats; only needed to disconnect it once.)  
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭


    So I'm beginning to research my autopilot/ then radar upgrades.
    I have to Simrad go9 now connected to my engines and a NMEA 2000 network with a smartcraft gateway which this forum was a great help setting up everything.
    I will use my current go9 for instrument data.
    Going to install a Simrad Nss16 Evo3s Chartplotter/Fishfinder Mfd with a bracket
    and use it to build my new system with newest hardware.
    Will need Auto pilot drive, rudder sensor, heading or precision compass, and eventually a Simrad halo 24 radar. any recommendations.  
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    edited May 5

    Last July boat "Debonair" was totaled by this tree.





    · Share on Facebook
  • LaReaLaRea Member, Moderator Posts: 8,056 mod
    Love it!  Same year as the wrecked boat?
    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,759 ✭✭✭✭✭
    Awesome! ⚓️
    2008 330EC
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    LaRea said:
    Love it!  Same year as the wrecked boat?
    Yes just different engine package AND a bow thruster!! which I never thought I needed until I got one!!!
    · Share on Facebook
  • Corral42Corral42 Member Posts: 68 ✭✭✭
    My buddy was removing his props on his 05 360 with Volvos. We noticed that the props are different from side to side. Anyone know what the correct set is?
    · Share on Facebook
  • tricountytrailtricountytrail Member Posts: 253 ✭✭
    Volvo Penta DUOPROP  F5Front  3851465 5B pitch is xx.xx inches, and the diameter is 14.75 inches Stainless Steel 3 Blades Lefthand rotation
    Volvo Penta DUOPROP  F5REAR 3851475 5B pitch is 22.75 inches, and the diameter is 14.41 inches Stainless Steel 3 Blades Righthand rotation

    These are what are on my 2005 360 with 
    Volvo Penta DPS-A OXi 1.78 Duoprop Outdrives (replaced 2014)?
    · Share on Facebook
Sign In or Register to comment.