Pic Of The Day

Comments

• Lake_Bum Member Posts: 1,133 ✭✭✭✭

  March 2025

  Looks to be folded under slightly, with the shadow sort of making it an illusion.  

  2000 Captiva 232 
  

  0 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 315 ✭✭✭

  March 2025

  That was sold. About 700# dressed. No way to give away that much tuna. Usually small fish can go through a transom door, but that was hoisted with a winch up and over the side. There are 5 fingers there 

  Rinker sold but still have other boats        Eastern LI, NY

  5 · Share on FacebookShare on Twitter
• Dream_Inn Member, Moderator Posts: 7,898 mod

  March 2025

  Well, I got my first ride of the year in today.  She ran great!
  
  
  

  Then I went home and got the rest of the tub installed. 

  
  

   Now heading into Annapolis to celebrate St Patty’s Day.  Busy day!
  
  

  Dream 'Inn III -- 2008 400 Express

  4 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,602 admin

  March 2025

  Congrat's on the first ride. 35* here today with 40mph wind gusts. Certainly not boating season......... Just say'n
  
  

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,308 ✭✭✭✭✭

  March 2025

  The smile on the boat looks natural. The smile in the tub is similar to one I would make while holding a crying baby 

  6 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 8,040 mod

  March 2025

  March 8th -- way to go!  I was always still scraping and painting outdrives in early March.  Keeping your boat on a lift must be awesome!

  1 · Share on FacebookShare on Twitter
• Ian Member Posts: 3,043 ✭✭✭✭✭

  March 2025

  28, calm now but windy later. I’d be lucky to get into the storage shed on March 8th…

  Regards,

  Ian

  The Third “B”

  Ravena Coeymans Yacht Club

  https://www.rcyachtclub.com/

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,721 ✭✭✭✭✭

  March 2025

  
  

  I went down to the marina today. We’re finally dredged! Past couple of years it’s been getting pretty bad in areas.
  
  
  

  2008 330EC

  4 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,602 admin

  March 2025

  @aero3113 we are in the process of getting our permits to dredge and I am overseeing the permit process. To get our permits the cost is $65.6K and that does not include the dredge, plus it takes 2 years to get the permits. Crazy money........

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  2 · Share on FacebookShare on Twitter
• Lake_Bum Member Posts: 1,133 ✭✭✭✭

  March 2025

  This is a natural "land bridge" at Lake Powell.  It is underwater currently,  but was exposed a few years ago for the first time in over 40 years....
  

  2000 Captiva 232 
  

  5 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,721 ✭✭✭✭✭

  March 2025 edited March 2025

  
  

  What’s in my near future ⚓️
  
  
  

  2008 330EC

  2 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 315 ✭✭✭

  March 2025

  It’s that time of year. How do you like Aqua-One?

  Rinker sold but still have other boats        Eastern LI, NY

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,721 ✭✭✭✭✭

  March 2025

  It’s a good bottom paint, keeps most of the growth off till the end of the season. I can do two seasons with it then will need a re-coat.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• YYZRC Member Posts: 5,381 ✭✭✭✭✭

  March 2025

  Better start shaking those cans now @aero3113

  2008 350 EC on Georgian Bay

  1 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,721 ✭✭✭✭✭

  March 2025 edited March 2025

  @YYZRC I hate having to deal with that with the bottom paint cans.
  Any tips?
  Do you think Home Depot or a local hardware store would use their shaker for me?

  2008 330EC

  0 · Share on FacebookShare on Twitter
• YYZRC Member Posts: 5,381 ✭✭✭✭✭

  March 2025

  I stirred the can real good and then sealed it back up and shook it until I was exhausted. 

  
  

  Shaking the can was more tiring than applying the bottom paint. 

  2008 350 EC on Georgian Bay

  0 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 315 ✭✭✭

  March 2025 edited March 2025

  I’ve had good results with Pettit Hydrocoat but before that have always used Interlux CSC. Local hardware store shakes any can I bring them but I also can use the shaker at the boatyard. 

  Rinker sold but still have other boats        Eastern LI, NY

  0 · Share on FacebookShare on Twitter
• Ian Member Posts: 3,043 ✭✭✭✭✭

  March 2025

  aero3113 said:

  @YYZRC I hate having to deal with that with the bottom paint cans.
  Any tips?
  Do you think Home Depot or a local hardware store would use their shaker for me?

  Go to your local owned ACE or whomever, they typically do it free but I’ve dropped a fiver to them in the past.
  
  

  Regards,

  Ian

  The Third “B”

  Ravena Coeymans Yacht Club

  https://www.rcyachtclub.com/

  0 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 315 ✭✭✭

  March 2025

  aero3113 said:

  
  

  What’s in my near future ⚓️
  
  
  

  
  

  Now just have to decide which boat to do first

  Rinker sold but still have other boats        Eastern LI, NY

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,721 ✭✭✭✭✭

  March 2025

  Supposed to be Mid 50’s next week for us. I’m hoping to do it then.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• captkevin Member Posts: 513 ✭✭✭

  March 2025

  80 in Chicago this afternoon
  

  2004 232

  2021 Yamaha Fx svho
  

  1 · Share on FacebookShare on Twitter
• rasbury Member Posts: 8,891 ✭✭✭✭✭

  March 2025

  We are in north western GA and it's been low 30's all week- to cold for this florida boy...

  0 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 8,040 mod

  March 2025

  Eye candy for a Thursday morning.  Detailers in southern Florida make Virginia detailers look like rookies by comparison.  And you have to appreciate guys who can do this work 40-50 hours a week ... just watching them makes my shoulders sore.  
  
  
  

  6 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,721 ✭✭✭✭✭

  March 2025

  Awesome! 

  2008 330EC

  0 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,602 admin

  March 2025

  Wow that is awesome

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• johnny44 Confirm Email, Member Posts: 134 ✭✭✭

  March 2025

  Typically you worry when someone new shows up to detail your boat. But when you see them put that setup together, you can go have a beer and relax knowing that they have absolutely done this before. That is fantastic!

  Former Boat: 2008 350 EC 
  Current Boat: 2002 Silverton 410 Sport Bridge
  Greenwich Bay, Rhode Island

  2 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 8,040 mod

  March 2025

  For every thru-hull, the strainer comes off to get stripped, primed and painted.  It's like nothing I've ever experienced.  Chris Bryan Boat Restoration
  
  
  

  5 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 8,040 mod

  March 2025

  B-Juled ... spotted yesterday in Fort Pierce Inlet.  Is the owner here?
  
  
  

  2 · Share on FacebookShare on Twitter
• Aqua_Aura Member Posts: 2,690 ✭✭✭✭✭

  April 2025

  Sitting on the bow cushion enjoying a 70 degree Washington day. 

  1997 Bayliner 3988

  3 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 8,040 mod

  April 2025

  18th green at the Heritage PGA tournament here in Hilton Head Island, South Carolina.  Taken from our dinghy, and yes that's as close as they let you get on a boat without paying.  I had to think, briefly ... what would I rather do with a giant wad of cash?  Buy tickets to a sport I don't really follow, or buy another tank of diesel?  
  
  
  

  3 · Share on FacebookShare on Twitter