@YYZRC if you're referring to the vertical handle as in the above picture where I have a black line attached to it, coming from the swim platform cleat, that vertical grab handle is accessible when you open the stern hatch. I had both the vertical handles off last year to rebed the handles. Easy access.
Awesome, thank you Spyder! That's the handle I was referring to. I think I will have a SS bar fashioned that sleeves over the top of the handle with a 90 degree bend to horizontal. The bar will then extend out to a BBQ mount.
Planning to position the BBQ about where this one is (but sans pedestal):
I'm adding some USB chargers to replace the old school cigarette lighter sockets. Just below the breaker panel in the aft cabin area I seem to recall there being a 12v socket. Am I crazy?
The 2009 (not sure what other years also) 340 is the same boat, the only way anyone will be able to tell is if they look up your hull number or realize the year and know it can’t be a 340. Just don’t list it as a 340 when you go to sell it, that would be bad!
The 2009 (not sure what other years also) 340 is the same boat, the only way anyone will be able to tell is if they look up your hull number or realize the year and know it can’t be a 340. Just don’t list it as a 340 when you go to sell it, that would be bad!
Here's a 330 rebadged as a 340 for sale as a 330. Say that 5 times fast!
They should’ve had the transom doors as standard, the rod holders and cooler could’ve been an option.
Do you think it would be possible to get the "non-fishing" transom door to hinge beyond 90 degrees? I would love to stash my little 6hp Yammy in there if possible, but I'm not a contortionist.
I'm adding some USB chargers to replace the old school cigarette lighter sockets. Just below the breaker panel in the aft cabin area I seem to recall there being a 12v socket. Am I crazy?
I put those in addition to the cigarette sockets. One down below and one at the helm. Then the admiral kept using the one at the helm from the other side of the boat so I put one on the port side under the cup holders.
I’m thinking about doing the same, keep a plug and USB at the helm and in the cabin and possibly put a USB below the outlet near the blender up top. I think I already have 12volt +- wires under there not being used. Do you guys think USB will be around for a while or something new is going to show up?
I’m thinking about doing the same, keep a plug and USB at the helm and in the cabin and possibly put a USB below the outlet near the blender up top. I think I already have 12volt +- wires under there not being used. Do you guys think USB will be around for a while or something new is going to show up?
I think USB will still be around when you and I get 360-itis and start shopping...
The 2009 (not sure what other years also) 340 is the same boat, the only way anyone will be able to tell is if they look up your hull number or realize the year and know it can’t be a 340. Just don’t list it as a 340 when you go to sell it, that would be bad!
In 2009 the 330 was rebadged the 340. By the last year of this boat (2016 or 2017) it had been rebadged the 350.
Comments
Planning to position the BBQ about where this one is (but sans pedestal):
Thank you for the heads-up on ordering white.
I'm also seriously considering rebadging my 330 to a 340. My 330 emblems are shot and I might be a poser.
https://www.unitedcityyachts.com/boat_listing.php?id=1243
Do you think it would be possible to get the "non-fishing" transom door to hinge beyond 90 degrees? I would love to stash my little 6hp Yammy in there if possible, but I'm not a contortionist.
2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX
Wait, is that today??
2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX