Pulled her, have a project to work on….

12346»

Comments

  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    Well….
    I think I need to replace the intake. Yesterday I noticed some weird condensation/moisture on the bottom of the intake under the thermostat. I cleaned the area and didn’t see any issues, looked solid. I went back to the boat this morning to look things over and clean mating surfaces. I noticed where I cleaned the intake had some moisture and corrosion back. It must be thin and seeping water through. I don’t think it’s my issue but will be an issue in the future if I don’t replace it. I didn’t take a picture of it this morning but will take a look tomorrow and see what it looks like. Also, I just looked closely and there might be a crack.





    2008 330EC
    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    Looks like I can order just the lower part of the manifold. 
    2008 330EC
    · Share on Facebook
  • Dream_InnDream_Inn Member, Moderator Posts: 7,946 mod
    I all of a sudden have a hankering for a yoohoo drink :smile: .  Sorry, that oil just looks like chocolate milk.  I agree with the crack and replacement.  Definitely don't want to dig back in there another time.

    Dream 'Inn III -- 2008 400 Express

    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    lol, yea. 
    Lower intake and gasket are on order. Should have them in a few days. I’m curious what the inside of the intake is going to look like once I open it up.
    2008 330EC
    · Share on Facebook
  • PickleRickPickleRick Member Posts: 4,371 ✭✭✭✭✭
    aero3113 said:
    lol, yea. 
    Lower intake and gasket are on order. Should have them in a few days. I’m curious what the inside of the intake is going to look like once I open it up.
    Kind of like a 3,000 dollar fj40
    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    PickleRick said:
    aero3113 said:
    lol, yea. 
    Lower intake and gasket are on order. Should have them in a few days. I’m curious what the inside of the intake is going to look like once I open it up.
    Kind of like a 3,000 dollar fj40
    😂
    2008 330EC
    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    I have the intake in my garage, went to take a look at it. You can see the moisture starting to make its way through from when I wiped it this morning. Tomorrow morning will really show.


    2008 330EC
    · Share on Facebook
  • captkevincaptkevin Member Posts: 564 ✭✭✭
    Good catch that is hard to believe 
    2004 232
    2021 Yamaha Fx svho
    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    I’ve been reading that this is a common area for this to happen. During the off season, I’ll see if I can stick my borescope in and check the starboard side.
    2008 330EC
    · Share on Facebook
  • captkevincaptkevin Member Posts: 564 ✭✭✭
    Have you check the manifold on the other motor?
    2004 232
    2021 Yamaha Fx svho
    · Share on Facebook
  • aero3113aero3113 Member Posts: 9,842 ✭✭✭✭✭
    edited 12:28AM
    Read above post @captkevin .
    This is what it looks like now. Glad I found this.


    2008 330EC
    · Share on Facebook
Sign In or Register to comment.