Rinker 390/400 2006+ Random Topics

12346

Comments

  • Dream_InnDream_Inn Member, Moderator Posts: 7,981 mod
    YYZRC said:
    Not exciting but new faucet and drain. 


    What was wrong with old one?

    Dream 'Inn III -- 2008 400 Express

  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited October 31
    Drain was rotted out. Faucet was just gross. 

    There was also a bunch of garbage in behind. I cut the cabinet out below the tap so I could clean. 

    Also ridiculous stuff like this going on:


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • aero3113aero3113 Member Posts: 10,087 ✭✭✭✭✭
    edited October 31
    Do you think that was done at Rinker or PO did it?
    @YYZRC , do you think you’ll have her floating by spring?
    2008 330EC
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    aero3113 said:
    Do you think that was done at Rinker or PO did it?
    @YYZRC , do you think you’ll have her floating by spring?
    Pretty sure that's PO handiwork!

    Transom assemblies are back in, I'm just waiting on motors which are taking forever. Looks like I won't get them back in time to install before the boat goes into indoor storage which sucks because I'm sure there are going to be electrical issues that I was hoping to have the winter to sort out.

    I'm also having an impossible time finding someone to do canvas.

    So that said it will go in the water in the spring, but whether it floats is a whole other topic!
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭

    2006 390 EC
    2008 350 EC
    Georgian Bay
  • aero3113aero3113 Member Posts: 10,087 ✭✭✭✭✭
    edited October 31
    What’s the electrical connector on top of the transom assemblies? Steering indicator?
    2008 330EC
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    The red/white/blue wires on both assemblies are the trim sender. On starboard side there is the steering angle sensor. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 3
    Got the windlass working. New bow rollers and Mantus swivel. 




    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 3
    New shower light 


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 3
    New head faucet



    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 3
    Relocated fresh water pump (temporary connections)



    2006 390 EC
    2008 350 EC
    Georgian Bay
  • grouch0jrgrouch0jr Member Posts: 282 ✭✭✭
    YYZRC said:
    New shower light 


    What did you use here?
    2006 342EC - Twin Mercruiser 350 MAG MPI Horizons
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    I added the link above
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • grouch0jrgrouch0jr Member Posts: 282 ✭✭✭
    Viewing in mobile, I didn't see it. Thanks for pointing it out and providing the link.
    2006 342EC - Twin Mercruiser 350 MAG MPI Horizons
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 3
    @Dream_Inn what are you using for garbage cans? I found a gross "Rubbermaid Contours" garbage can but not sure it's original?

    Edit: after some searching on here, it seems it is original. 2805 model. $50 for a new one, wtf. Does someone at Rubbermaid know these were used in boats?
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    Got the shower rail mounted and valve plumbed. 


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    Inverter mounted and DC wiring done. 


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    Carpet day!  :/


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭

    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 7

    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭

    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭

    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭

    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭


    Just tacked in place until the vinyl relaxes. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    Shower hook-up done. Have some holes to fill. 


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    Added a remote to the windlass. 


    2006 390 EC
    2008 350 EC
    Georgian Bay
  • Dream_InnDream_Inn Member, Moderator Posts: 7,981 mod
    You guys are making me feel like I should be doing something to my boat!  I guess I should have posted everything from the prior few weekends and then I would feel ok. Planning to go down on Sunday and put a new amp in for the stereo.  Any recommendations on how to get to it behind the panel above the breakers in the salon? Maybe @YYZRC has some pics of that area?

    Dream 'Inn III -- 2008 400 Express

  • YYZRCYYZRC Member Posts: 5,591 ✭✭✭✭✭
    edited November 7
    That power cabinet is a total disaster. I’m one more injury away from taking a chainsaw to it. 

    I don’t have any pics but I removed the trim panel from the top of the cabinet to access the upper area. My boat has 2 amps. 
    2006 390 EC
    2008 350 EC
    Georgian Bay
  • FormulabenFormulaben Confirm Email, Member Posts: 239 ✭✭✭
    YYZRC said:
    That power cabinet is a total disaster. I’m one more injury away from taking a chainsaw to it. 
    LMAO...only laughing because I felt the same way so many times re-wiring my media/amps and other times too.  It's such a love/hate relationship when it comes time for maintenance & upgrades with a boat. 
    2006 Fiesta Vee 270
  • Dream_InnDream_Inn Member, Moderator Posts: 7,981 mod
    Ok, you guys are scaring me.  I need to replace the amp which is on the top.  What do I need to do to get that upper front panel off?  Without it off, I think it would be too difficult to remove the old one.

    Dream 'Inn III -- 2008 400 Express

Sign In or Register to comment.