Pic Of The Day

Comments

• Lake_Bum Member Posts: 1,009 ✭✭✭✭

  March 6

  Looks to be folded under slightly, with the shadow sort of making it an illusion.  

  2000 Captiva 232 
  

  0 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 214 ✭✭✭

  March 7

  That was sold. About 700# dressed. No way to give away that much tuna. Usually small fish can go through a transom door, but that was hoisted with a winch up and over the side. There are 5 fingers there 

  Rinker sold but still have other boats        Eastern LI, NY

  4 · Share on FacebookShare on Twitter
• Dream_Inn Member, Moderator Posts: 7,701 mod

  March 8

  Well, I got my first ride of the year in today.  She ran great!
  
  
  

  Then I went home and got the rest of the tub installed. 

  
  

   Now heading into Annapolis to celebrate St Patty’s Day.  Busy day!
  
  

  Dream 'Inn III -- 2008 400 Express

  4 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,517 admin

  March 8

  Congrat's on the first ride. 35* here today with 40mph wind gusts. Certainly not boating season......... Just say'n
  
  

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,075 ✭✭✭✭✭

  March 8

  The smile on the boat looks natural. The smile in the tub is similar to one I would make while holding a crying baby 

  6 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 7,815 mod

  March 9

  March 8th -- way to go!  I was always still scraping and painting outdrives in early March.  Keeping your boat on a lift must be awesome!

  1 · Share on FacebookShare on Twitter
• Ian Member Posts: 2,893 ✭✭✭✭

  March 9

  28, calm now but windy later. I’d be lucky to get into the storage shed on March 8th…

  Regards,

  Ian

  The Third “B”

  Secretary, Ravena Coeymans Yacht Club

  https://www.rcyachtclub.com/

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,141 ✭✭✭✭✭

  March 9

  
  

  I went down to the marina today. We’re finally dredged! Past couple of years it’s been getting pretty bad in areas.
  
  
  

  2008 330EC

  4 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,517 admin

  March 9

  @aero3113 we are in the process of getting our permits to dredge and I am overseeing the permit process. To get our permits the cost is $65.6K and that does not include the dredge, plus it takes 2 years to get the permits. Crazy money........

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  2 · Share on FacebookShare on Twitter
• Lake_Bum Member Posts: 1,009 ✭✭✭✭

  March 10

  This is a natural "land bridge" at Lake Powell.  It is underwater currently,  but was exposed a few years ago for the first time in over 40 years....
  

  2000 Captiva 232 
  

  5 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,141 ✭✭✭✭✭

  March 12 edited March 12

  
  

  What’s in my near future ⚓️
  
  
  

  2008 330EC

  2 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 214 ✭✭✭

  March 12

  It’s that time of year. How do you like Aqua-One?

  Rinker sold but still have other boats        Eastern LI, NY

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,141 ✭✭✭✭✭

  March 12

  It’s a good bottom paint, keeps most of the growth off till the end of the season. I can do two seasons with it then will need a re-coat.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• YYZRC Member Posts: 5,179 ✭✭✭✭✭

  March 12

  Better start shaking those cans now @aero3113

  2008 350 EC on Georgian Bay

  1 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,141 ✭✭✭✭✭

  March 12 edited March 12

  @YYZRC I hate having to deal with that with the bottom paint cans.
  Any tips?
  Do you think Home Depot or a local hardware store would use their shaker for me?

  2008 330EC

  0 · Share on FacebookShare on Twitter
• YYZRC Member Posts: 5,179 ✭✭✭✭✭

  March 12

  I stirred the can real good and then sealed it back up and shook it until I was exhausted. 

  
  

  Shaking the can was more tiring than applying the bottom paint. 

  2008 350 EC on Georgian Bay

  0 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 214 ✭✭✭

  March 12 edited March 12

  I’ve had good results with Pettit Hydrocoat but before that have always used Interlux CSC. Local hardware store shakes any can I bring them but I also can use the shaker at the boatyard. 

  Rinker sold but still have other boats        Eastern LI, NY

  0 · Share on FacebookShare on Twitter
• Ian Member Posts: 2,893 ✭✭✭✭

  March 12

  aero3113 said:

  @YYZRC I hate having to deal with that with the bottom paint cans.
  Any tips?
  Do you think Home Depot or a local hardware store would use their shaker for me?

  Go to your local owned ACE or whomever, they typically do it free but I’ve dropped a fiver to them in the past.
  
  

  Regards,

  Ian

  The Third “B”

  Secretary, Ravena Coeymans Yacht Club

  https://www.rcyachtclub.com/

  0 · Share on FacebookShare on Twitter
• Rich_ Member Posts: 214 ✭✭✭

  March 14

  aero3113 said:

  
  

  What’s in my near future ⚓️
  
  
  

  
  

  Now just have to decide which boat to do first

  Rinker sold but still have other boats        Eastern LI, NY

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,141 ✭✭✭✭✭

  March 14

  Supposed to be Mid 50’s next week for us. I’m hoping to do it then.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• captkevin Member Posts: 308 ✭✭

  March 14

  80 in Chicago this afternoon
  

  2004 232

  2021 Yamaha Fx svho
  

  1 · Share on FacebookShare on Twitter
• rasbury Member Posts: 8,467 ✭✭✭✭✭

  March 19

  We are in north western GA and it's been low 30's all week- to cold for this florida boy...

  0 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 7,815 mod

  March 20

  Eye candy for a Thursday morning.  Detailers in southern Florida make Virginia detailers look like rookies by comparison.  And you have to appreciate guys who can do this work 40-50 hours a week ... just watching them makes my shoulders sore.  
  
  
  

  5 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,141 ✭✭✭✭✭

  March 20

  Awesome! 

  2008 330EC

  0 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,517 admin

  March 20

  Wow that is awesome

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• johnny44 Confirm Email, Member Posts: 113 ✭✭

  March 20

  Typically you worry when someone new shows up to detail your boat. But when you see them put that setup together, you can go have a beer and relax knowing that they have absolutely done this before. That is fantastic!

  Sold - 2008 350 EC -- Greenwich Bay, Rhode Island

  2 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 7,815 mod

  March 20

  For every thru-hull, the strainer comes off to get stripped, primed and painted.  It's like nothing I've ever experienced.  Chris Bryan Boat Restoration
  
  
  

  5 · Share on FacebookShare on Twitter
• LaRea Member, Moderator Posts: 7,815 mod

  March 23

  B-Juled ... spotted yesterday in Fort Pierce Inlet.  Is the owner here?
  
  
  

  2 · Share on FacebookShare on Twitter