The H3O is a good rig but the winch arm is very cumbersome and poorly designed. Also, the winch body isn’t stainless and for the extra $600 they charge for the upgrade from crank to electric I expected better. It looks like a bunch of parts from Amazon warehouse deals.
@aero3113 have you replaced the trucks in your cabin door? Wondering which size. The train rail on my door cracked this winter due to ice so I figure I may as well replace the trucks at the same time.
Did some calcs for putting a bigger fridge in the cockpit bar area and the Dometic CRX 80 will fit with some mods and killing the blender. Sink can stay for now but I will likely replace the countertop this winter with one piece.
Ordered the fridge in stainless - supposed to arrive in a month or so.
Added a dimmable “romance” light for late night dinner/drinks. It is wired with the cockpit lights. The other light is wired to the hardtop “spreader” lights circuit.
The Blue Sea dimmer seems like a quality piece.
Will mount everything nicely next to the starboard side speaker once I get the USB socket.
My track on the 270 is way different and to be honest, a better design..there are no wheels but a ball that rides on the top edges of the track. If the track gets crap in it, does not really cause a problem. Those wheels look like a problem.
I was having trouble with mine when I first got the boat- I looked at the bottom track and it was loose- so I got her back down tight and the door well you could not budge it. The track on the top is nice and straight- the floor has a slight curve to it so we I got it tight it just bound up- so I got some washers and got it tight and flat...
Comments
I think I would leave it as is. A skirt might catch too much water while getting up on plane and at speed.
I was having trouble with mine when I first got the boat- I looked at the bottom track and it was loose- so I got her back down tight and the door well you could not budge it. The track on the top is nice and straight- the floor has a slight curve to it so we I got it tight it just bound up- so I got some washers and got it tight and flat...