What did you do to your boat today

zaverin1 · July 2017

Stodge I can sell you a vision auto guidance chip

zaverin1 · July 2017

Replaced 2 cabin lights today
with oem rinker lights

Stodge · July 2017

zaverin1 said:

Stodge I can sell you a vision auto guidance chip

PM sent

gack · July 2017

Image: https://us.v-cdn.net/5020499/uploads/editor/5e/427wbh6zh49s.jpg

Good day for upgrades. Added new faucets on deck and head thanks to @diggin2day1 and @J3ff . Head faucet must have been leaking because replacing it solved my problem of water pump coming on every few minutes!

J3ff · July 2017

ha ha nice upgrades!!

I drove my boat for 6 hours straight today.... from newport RI to West Long Island sound... almost to NY.. what a run!

Handymans342 · July 2017

I'm next

Stodge · July 2017

Stodge said:

@Willhound I prefer Garmin too. Had a 4208 on my FV280. The 342 had the HDS5 with sonar so I was not in a hurry to replace it even though I didn't care for it. I have other Garmin devices so now they can all share.

I found the 721 on The GPS Store for $599 shipped. They bundled in the Bluecharts G2 (not vision) for that price. I "think" the only difference between the 721 and the 741 is that the 721 came without charts.

Willhound · July 2017

Sweet! And if you get that Vision chip from @zaverin1 I think you'll like the auto-guidance feature. Lot more detail to the maps also, and depending on the model there's a 3D view of bottom contour. Handy for finding fishing spots.

zaverin1 · July 2017

Nice

zaverin1 · July 2017

Image: https://us.v-cdn.net/5020499/uploads/editor/3r/tu48wi0zx0e2.jpg

zaverin1 · July 2017

Had the ski out after rebuild

nick92675 · July 2017

changed joker valve. getting smarter at this, now on my 3rd one - first time didn't pump out prior and definitely covered myself in pi$$. fresh pump out and multiple washdowns made the little bit of fluid pretty minimal and not gross.

also cleaned out spider nests/junk from the horn, and tweaked the screws a bit to make it go from a comically wussy sounding blat to a more respectable blat. new horn purchase avoided.

also swam in 73.5 deg dead calm water overlooking the skyline. beautiful.

JoeStang · August 2017

How do you adjust the horn? Mines a dinky sound too, always wished it was louder.

I had to replace the very first part that has failed on my boat. All of a sudden my down trim was not working, only up. Luckily I caught it before going up too far and not getting on plane, as I was 90 miles from home.

Had a marine mechanic buddy come out and diagnose for me, it was a bad trim pump solenoid. Apparently there is a separate one for up & down. $25, some scraped fingers, and a couple beers later I'm back in business.

zaverin1 · August 2017

That looks like a reg merc slave solenoid used for starting and everything else lol

JoeStang · August 2017

Yeah I wouldn't doubt it. At least I have a wide open engine bay to work on. That wouldn't be a fun job otherwise.

Dream_Inn · August 2017

Joe, if you ever get stuck and the solenoid doesn't work, you can just jumper across it to make the drive go back down. Just be aware there may be some spark, so make sure there are no fumes.

Here's a pic of some space in my ER....Definitely gotta enjoy having space to work on things!

JoeStang · August 2017

Yeah m mechanic buddy showed me that trick. I figured it was something like that, and its good to know how to get it working if it fails.

No one is feeling sorry for your lack of engine room space when you have 40 grand worth of motors in there. LOL

raybo3 · August 2017

I could save thousands if I had that kind of space........ Just say'n.

trip_n · August 2017

but....it cost thousands more to get that kinda space

reneechris14 · August 2017

Love the white paint, keep my 342 enough space for me and my wallet.

JoeStang · September 2017

Washed and waxed mine the other day. The spiders and rain had made a mess, but she cleaned up pretty good!

Image: https://us.v-cdn.net/5020499/uploads/editor/lf/86ry2scjc5ve.jpg

Image: https://us.v-cdn.net/5020499/uploads/editor/kv/gat4vc3oaoov.jpg

Michael T · September 2017

Joe that would be a great boat to stroke the 350 Mag into a 383 with through hulls!

LaRea · September 2017

Dream_Inn said:

Here's a pic of some space in my ER....Definitely gotta enjoy having space to work on things!

In case anyone wonders whether the engine room on @Dream_Inn actually looks that good in person ... no. It looks even better in person.

JoeStang · September 2017

Michael T said:

Joe that would be a great boat to stroke the 350 Mag into a 383 with through hulls!

That would be the plan when its due. I've got 300 hours on it now, so at this rate it wont be far off! Its only a 2013.

So Tuesday I enjoyed the hottest day of the summer up here in Detroit, 94*, sunny, and 5mph breeze! It was the perfect day out there. Just a friend, btw.

Image: https://us.v-cdn.net/5020499/uploads/editor/k8/6fzco3kjj4kt.jpg

Image: https://us.v-cdn.net/5020499/uploads/editor/tt/ux874fwmu3hj.jpg

JoeStang · September 2017

It ran it's course, but it was a fun trip!!

JoeStang · September 2017

This season ain't over yet, I've still got 3.5 weeks.

gack · September 2017

@JoeStang, what happened to your blond "friend"?

Michael T · September 2017

Joe - you are taking some of us back to our earlier years :-) bless you for that young feller!

JoeStang · October 2017

gack said:

@JoeStang, what happened to your blond "friend"?

She's 24, so yeah she did what they do.

Nothing dramatic, but I dont have time for someone that doesnt know what they want.

Michael T said:

Joe - you are taking some of us back to our earlier years :-) bless you for that young feller!

I never got to enjoy my 20's like this, so I'm making up for lost time a little. LOL

Stodge · October 2017

I have to ask my wife what it is I want.

Learned that during the first marriage.

Howdy, Stranger!

Quick Links

Categories

What did you do to your boat today

Comments