What did you do to your boat today

Comments

• JoeStang Member Posts: 1,131 ✭✭✭✭

  April 2020

  I've had very good luck with the deep cycle & starting batteries from Sams Club. They are Duracell brand, but made by Penn Deka. They're $20 off right now too, $80 for a group 31.
  

  
  

  They make AGM also, for a bit more.
  

  2013 276 Cuddy ~ 350 MAG / B3
  

  0 · Share on FacebookShare on Twitter
• JoeStang Member Posts: 1,131 ✭✭✭✭

  April 2020

  And I'm kinda bummed right now. My boat is trapped in winter storage right now. With the "shelter in place" order, the storage yard is considered non-essential, so until its lifted I cant get the boat. Not that I really need it until mid April, but I have spare time now to bring it home and work on it. Such is life right now.

  2013 276 Cuddy ~ 350 MAG / B3
  

  0 · Share on FacebookShare on Twitter
• Cableguy Greg Member Posts: 5,057 ✭✭✭✭✭

  April 2020

  JoeStang said:

  I've had very good luck with the deep cycle & starting batteries from Sams Club. They are Duracell brand, but made by Penn Deka. They're $20 off right now too, $80 for a group 31.
  

  
  

  They make AGM also, for a bit more.
  

  I have the Duracell AGM's and they are good batteries. Deka makes a nice product here in the USofA.

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
  Go Steelers!!!
  

  0 · Share on FacebookShare on Twitter
• Dream_Inn Member, Moderator Posts: 7,831 mod

  April 2020

  Cableguy Greg said:

  JoeStang said:

  I've had very good luck with the deep cycle & starting batteries from Sams Club. They are Duracell brand, but made by Penn Deka. They're $20 off right now too, $80 for a group 31.
  

  
  

  They make AGM also, for a bit more.
  

  I have the Duracell AGM's and they are good batteries. Deka makes a nice product here in the USofA.

  I installed one of these in my streetrod a couple years ago and have been very happy with it.  I think I may have to get that toy and play with it since my boat is also under a cover still and here in MD they have prohibited recreational boating.
  

  Dream 'Inn III -- 2008 400 Express

  0 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,579 admin

  April 2020

  @Dream_Inn I thought your boat was in the water already?????????

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• Dream_Inn Member, Moderator Posts: 7,831 mod

  April 2020

  raybo3 said:

  @Dream_Inn I thought your boat was in the water already?????????

  No, it is on the lift and completely ready to go (everything, including liquor) moved in!  I hesitated because I did not want to uncover it and then be stuck not be allowed to use it.  Which I technically would be.   I'd be a sitting duck out on the water in that boat right now.  
  
  I'm really torn about not removing the cover this Friday with nice 60+ degree weather and I have Friday off (yes, I'm still going in to work).  But, I'd probably get stuck about half way into removing my cover & being told I can't sit on my boat, even just in the marina.
  

  Dream 'Inn III -- 2008 400 Express

  0 · Share on FacebookShare on Twitter
• raybo3 Administrator Posts: 5,579 admin

  April 2020

  @Dream_Inn my club has suspended putting out docks in (we remove them for the winter) and not sure when we will be able to put them in. If its too late in the season then I may not even go in this year........ 

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,602 ✭✭✭✭✭

  April 2020 edited April 2020

  I was cleaning in the engine compartment today and came across this alternator wire on the starboard side. Thanks to my trusty Harbor Freight hydraulic crimpers and water proof shrink wrap, it’s like new now!
  
  

  
  

  
  

  
  

  
  

  2008 330EC

  3 · Share on FacebookShare on Twitter
• rasbury Member Posts: 8,782 ✭✭✭✭✭

  April 2020

  Goodness! Good Catch!

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,602 ✭✭✭✭✭

  April 2020

  rasbury said:

  Goodness! Good Catch!

  Yea, I wasn’t going to work on the boat today but decided to go clean and get my mind off of things, glad I did.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• Cableguy Greg Member Posts: 5,057 ✭✭✭✭✭

  April 2020

  @aero3113, what did that crimper run you?

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
  Go Steelers!!!
  

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,602 ✭✭✭✭✭

  April 2020

  @Cableguy Greg , I’ve had it a couple of years, I forget what I paid. But it’s $59.99 on the website now. With a 20% off coupon it’s a great tool to have.
  
  https://www.harborfreight.com/hydraulic-wire-crimping-tool-66150.html
  

  2008 330EC

  0 · Share on FacebookShare on Twitter
• aero3113 Member Posts: 9,602 ✭✭✭✭✭

  April 2020

  I re-crimped all of my 242 battery cable ends with it, works great.

  2008 330EC

  0 · Share on FacebookShare on Twitter
• boatman37 Member Posts: 810 ✭✭✭

  April 2020 edited April 2020

  Picked the boat up today from storage

  
  

  
  

  2 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020

  More sanding..it eventually ends I've been told
  
  
  

  0 · Share on FacebookShare on Twitter
• rasbury Member Posts: 8,782 ✭✭✭✭✭

  April 2020

  No, it does not Rick

  1 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020

  @rasbury, this is the only time im happy my boat is only a 235fv

  1 · Share on FacebookShare on Twitter
• John41 Member Posts: 112 ✭✭

  April 2020

  Took off my rub rail on the port side and filled the holes with some 4200. I had water leaking inside the forward berth. I hope this takes care of the problem 

  0 · Share on FacebookShare on Twitter
• 69fastback Member Posts: 951 ✭✭✭

  April 2020

  I changed the oil in my outdrive today, because I didn’t get a chance to do it before I left for training in November, and then I started the boat. It’s all ready for a day it’s not raining. Maybe July?
  

  0 · Share on FacebookShare on Twitter
• rasbury Member Posts: 8,782 ✭✭✭✭✭

  April 2020

  We are dying for rain in FL...very dry March...

  0 · Share on FacebookShare on Twitter
• mattie Member Posts: 1,322 ✭✭✭✭

  April 2020

  boatman37 said:

  Picked the boat up today from storage

  
  

  
  

  Shortest swim platform ever!!
  
  
  kidding

  246BR, 276BR, H310BR current

  0 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020

  mattie said:

  boatman37 said:

  Picked the boat up today from storage

  
  

  
  

  Shortest swim platform ever!!
  
  
  kidding

  
  
  Rudest thing I've ever heard a Canadian say😂😂😂
  
  That boat makes the the pick up look like a toy.

  0 · Share on FacebookShare on Twitter
• reneechris14 Member Posts: 3,134 ✭✭✭✭✭

  April 2020

  boatman37 said:

  Picked the boat up today from storage

  
  

  
  

  Every time I see the pic I think the bow rail is all bent up becauce of the roof line behind it. 

  2005 Rinker FV342  Pawcatuck river,Ct

  1 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020

  
  
  Almost done with the starboard side other than whats under the rollers.  I have a house jack and plenty of blocks to get it in the air a little at a time.
  
  
  

  0 · Share on FacebookShare on Twitter
• boatman37 Member Posts: 810 ✭✭✭

  April 2020 edited April 2020

  lol. Yeah. The swim platform is in my garage. Took it off last fall cause I had a soft spot. And yeah, when I glance at the pic the roofline of the storage place looks like a bent railing. It's an underground storage facility.
  

  
  

  The boat is a 25'er. The truck is a 2018 2500 but that boat looks much larger than a 25'er behind that truck...lol.
  

  
  

  
  

  0 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020 edited April 2020

  Takes a big boat to dwarf a crew cab 3/4 ton, that's a lot of wheel base.  
  
  
  

  0 · Share on FacebookShare on Twitter
• GMSLITHO Member Posts: 1,600 ✭✭✭✭

  April 2020

  Rick the boat looks great .how long did it take to do the one side 

  0 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020 edited April 2020

  Thank you, Ive worked on it about 30 min after work every day this week and an hour or two last Sunday.  

  0 · Share on FacebookShare on Twitter
• PickleRick Member Posts: 4,243 ✭✭✭✭✭

  April 2020

  another approx 2x3 section finished. 
  

  0 · Share on FacebookShare on Twitter
• Aqua_Aura Member Posts: 2,690 ✭✭✭✭✭

  April 2020

  @PickleRick How are you going to reapply the bottom paint? Paint it then move it on the trailer to get to the other areas. I want to do my own but I am worried about being able to get all the areas (I have bunks not rollers). I have seen a few different ways of doing it that don't include pulling it off the trailer and blocking it. 

  1997 Bayliner 3988

  0 · Share on FacebookShare on Twitter