What did you do to your boat today

MarkB · February 2020

PickleRick said:

There's a good chance pizzas will be cooked inside this! I mostly wanted it for my morning bagels or English muffins.

I'll Private Message you my phone number ... text me when pizza is ready, wine is cold, it's about 85F outside with sun shining ... and location.

MarkB · February 2020

PickleRick said:

Im not a huge fan of microwaves. Fries and buffalo wings reheated in the microwave sucks.

Yeah, who wants soggy fries and ewww, the taste/smell of chicken after it's been nuked is gross.

PickleRick · February 2020

About May we will start getting multiple days in the 80s. Im ready for some of this weather. In spring/early summer this beach is regularly visited by wild turkey and deer each morning, if you wake up early enough and are quiet you can catch them hanging out.

Nothing compared to you guys up north/north west with your moose hanging out in 20ft depths.

I don't drink wine but there's always rum and beer, none of that bud/miller/coores horse **** either. Its good beer, for American beer.

I hope to have my v berth table finished by this weekend, im not super great with this wood working.

I have made fitted sheets for all 5 v berth cushions so it's essy to convert from table to bed. Even finished off the cushions with a terry water proof cover that goes under the fitted sheets so I don't have a wet bed to sleep in.

LaRea · February 2020

icoultha said:

rasbury said:

Dang. I'm just trying to get my bielge pumps to work and I'd be happy...

So would the “bilge” pump....

@icoultha - "bielge" is when you pronounce "bilge" with a thick Florida accent!

aero3113 · February 2020

I was looking over and cleaning my prop nuts/thrust washers and didn’t like the way one of the outer nuts looked. There was some brass missing that exposed the nylon. I ordered two new outer nuts to be safe, everything else looked good.

Image: https://us.v-cdn.net/5020499/uploads/editor/jy/jkvqr5gadafm.jpeg

PickleRick · February 2020

Ran out of trim for the night.

PickleRick · March 2020

removed the alcohol burner and put this in, this is where the coffee maker will sit. I still need to put in my stainless hardware.

V Berth table is done, just need to mount it and the trim for the air fryer/toaster oven is stained. Hope to start carpet soon

Liberty44140 · March 2020

Rick that looks great!

PickleRick · March 2020

Thank you. Wood working is above my area of expertise. The admiral hasn't seen the cabin since last fall. The goal is to meet her approval.

PickleRick · March 2020

I have new 2 outlets, one on each end of the v berth for her hair dryer and straightener.

The admial is in retail management, meaning she works most weekends. She goes to/from work to the boat. This summer she'll be able to get ready much more easily.

rasbury · March 2020

So is this boat for boating or just someplace different to eat?

PickleRick · March 2020

Anywhere i go is someplace different to eat!

PickleRick · March 2020

We like to eat well. I don't mind some peanut butter sandwiches for lunch but i like to cook a huge breakfast and as soon as the sun starts to set its time to cook a good dinner.

I want to put in 2 captains chairs and a rear facing bench seat with good under seat storage where i currently have 4 total back to back seats. Id like to be able to store an lp grill and lp griddle under the seat when not in use. The transom on a 23 footer isn't big enough to keep cooking equipment mounted at all times.

PickleRick · March 2020

this is what i currently have. Impossible to access under them for much useful storage. They are also uncomfortable.

I'd like maybe a rear seat like one of these

Image: https://us.v-cdn.net/5020499/uploads/editor/qv/e7bfwrjl1vlf.jpg

Then for the captains chairs. The main issue is space on the platfrom. I might have to go to one of the fold down leaning post style for rear seats mounted to or on top of a storage box. With some 1/2 ply, stainless hinges and marine vinyl i could make a pretty nice storage box or incorporate it in a cooler.

would love something like this but too complicated to build. Measurements would need to be diffent for the rinker

aero3113 · March 2020

Just washed my Bimini top in our front loader washing machine (just fit). Looks really clean now, I have it drying in the basement then will spray with Starbrite waterproofing (I’ve had really good results and long lasting repelling with Starbrite in the past).

rasbury · March 2020

That is what I need to do..

RiverRat232 · March 2020

aero3113 said:

Just washed my Bimini top in our front loader washing machine (just fit). Looks really clean now, I have it drying in the basement then will spray with Starbrite waterproofing (I’ve had really good results and long lasting repelling with Starbrite in the past).

I used to use this product for my motorcycling textile jackets. I am wondering how well it would work on my mooring cover.
https://www.amazon.com/Nikwax-Hardshell-Cleaning-Waterproofing-DUO-Pack/dp/B000PGOOIS/ref=asc_df_B000PGOOIS/?tag=hyprod-20&linkCode=df0&hvadid=198088239593&hvpos=&hvnetw=g&hvrand=4661829660480179491&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015804&hvtargid=pla-349066034564&psc=1

PickleRick · March 2020

PickleRick · March 2020

PickleRick · March 2020

All interior lights are led. Carpet is only glued lightly at corners/angled surfaces and now trimmed in for easy seasonal/as needed removal for pressure washing in the drive way. I used an indoor/outdoor carpet from lowes. My boat didnt come with a v berth table. Each cushion now has its own fitted sheet for easy bed to table conversion. Please ignore my v berth pile. Much of that is going awat this season. I now have a bimini shade extension so i wont need an umbrella. If she doesn't sell an extended platfrom is on the list of things to do, at that time an umbrella will be added back to the onboard inventory.

Image: https://us.v-cdn.net/5020499/uploads/editor/nq/69n4xtkcshb1.jpg

PickleRick · March 2020

PickleRick · March 2020

69fastback · March 2020

it’s about the time of year where I’m confident we won’t have anymore hard freezes, so it’s time to service the trailer wheel bearings, and giving the boat it’s yearly polishing and clean up. It’s almost time to go boating!

GMSLITHO · March 2020

Replaced the wood on my transom

Image: https://us.v-cdn.net/5020499/uploads/editor/9m/eh5jemnxuvjs.jpeg

mattie · March 2020

RiverRat232 said:

aero3113 said:

Just washed my Bimini top in our front loader washing machine (just fit). Looks really clean now, I have it drying in the basement then will spray with Starbrite waterproofing (I’ve had really good results and long lasting repelling with Starbrite in the past).

I used to use this product for my motorcycling textile jackets. I am wondering how well it would work on my mooring cover.
https://www.amazon.com/Nikwax-Hardshell-Cleaning-Waterproofing-DUO-Pack/dp/B000PGOOIS/ref=asc_df_B000PGOOIS/?tag=hyprod-20&linkCode=df0&hvadid=198088239593&hvpos=&hvnetw=g&hvrand=4661829660480179491&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9015804&hvtargid=pla-349066034564&psc=1

Used Nikwax on my snowmobile gear & downhill ski gear. Works well for garments, GoreTex etc. But I’d stick to Starbrite waterproofing works really well on boat fabrics.

rasbury · March 2020

Looking good! What a project!

PickleRick · March 2020

Teak cabinet door done, reclaimed wood from the old carver i parted out

Clean cabin ready for water to warm up enough to launch. Now its time to start on the seating, hull paint and possibly manifolds.

Image: https://us.v-cdn.net/5020499/uploads/editor/ig/cypfx9xz47st.jpg

rasbury · March 2020

Looking good!

PickleRick · March 2020

Thank you. The admiral pointed out i need new curtains and floor mats to match the new carpet. That means new decorative pillows too.

Aqua_Aura · March 2020

@aero3113 great you mixed business with pleasure 😣. I go boating to forget about work 😁

Howdy, Stranger!

Quick Links

Categories

What did you do to your boat today

Comments