What did you do to your boat today

12467…141

Comments

  • 69fastback69fastback Member Posts: 951 ✭✭✭
    I've had a couple of old automotive amplifiers powering the speakers in my boat, and they were finally starting to have issues. I know several of the guys at Kicker, and they hooked me up with 2200 watts RMS of greatness. I got them both hooked up, and the difference is dramatic. These things are clean and loud, and the adjustability on them is awesome. I still have some wiring clean up to do, but they make a lot of noise. 
    · Share on Facebook
  • randy56randy56 Member Posts: 4,085 ✭✭✭✭✭
    I'm IN, The river finial y when't down, First nite on boat July 1st.

    Boat Name : 

    · Share on Facebook
  • trip_ntrip_n Member Posts: 747 ✭✭✭
    edited July 2017
    @randy56.........great pic
    reminds me of charley browns pig-pen
    glad your boat n
    · Share on Facebook
  • DazeOffDazeOff Member Posts: 164 ✭✭✭

    Installed snaps on new windshield connector and side curtains. Thx TJ @boattech01
    · Share on Facebook
  • J3ffJ3ff Member Posts: 4,224 ✭✭✭✭✭
    In preparation for the trip on the boat, replaced the bathroom faucet/shower with this one (got it on amazon warehouse for 40 bucks!): https://www.amazon.com/gp/product/B00JLCV3X6/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1

    Works pretty nicely!!




    · Share on Facebook
  • Handymans342Handymans342 Member Posts: 10,375 ✭✭✭✭✭
    Nice
    · Share on Facebook
  • zaverin1zaverin1 Member Posts: 1,672 ✭✭✭
    Replaced bilge blower and most of my skin on the arm lol
    · Share on Facebook
  • boattech01boattech01 Member Posts: 361 ✭✭✭
    Thank you Dazeoff !!!
    · Share on Facebook
  • BellevilleMXZBellevilleMXZ Member Posts: 732 ✭✭✭
    DazeOff said:

    Installed snaps on new windshield connector and side curtains. Thx TJ @boattech01

    TJ is the man! Loving our all new canvas from him for the second year!
    2005 Rinker 270 FV Volvo Penta 5.7Gi
    · Share on Facebook
  • trip_ntrip_n Member Posts: 747 ✭✭✭
    i got to pay my man.....dan...!
    to install shift cable kit(bellows leaking) & a new bilge pump..(stopped working)
    didn't go out because of weather a few days..getting ready to go home..lucky i checked the bilge and lucky my neighbor had a shop vac...it holds a lot of water 
    good news were ready for the weekend
    · Share on Facebook
  • boattech01boattech01 Member Posts: 361 ✭✭✭
    thanks bellevillemxz boat looks great. Tj
    · Share on Facebook
  • mskpharmdmskpharmd Member Posts: 44 ✭✭
    Ok, so thanks to the beautiful work of diggin, here's what I did to my baby today, before and after pictures. 30 minutes and one cold corona...no comparison!!! Thanks brother worth every penny! Looks like they belong on the boat...quality workmanship...
    · Share on Facebook
  • J3ffJ3ff Member Posts: 4,224 ✭✭✭✭✭
    Brought out a blender and had a party! 'Merica! 
    · Share on Facebook
  • Cableguy GregCableguy Greg Member Posts: 5,077 ✭✭✭✭✭
    @J3ff , looks like a great time.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
    · Share on Facebook
  • Cableguy GregCableguy Greg Member Posts: 5,077 ✭✭✭✭✭
    I removed my windshield screw cover vinyl, pulled out the screws and rebedded them with 3M4000 caulk. I then installed my new screw cover vinyl and made sure to leave it long so it hopefully won't shrink too much. I also painted my wiper arm flat black since the paint had worn away. I would have rather been rafted up in a group.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
    · Share on Facebook
  • Handymans342Handymans342 Member Posts: 10,375 ✭✭✭✭✭
    Cableguy Greg said:
    I removed my windshield screw cover vinyl, pulled out the screws and rebedded them with 3M4000 caulk. I then installed my new screw cover vinyl and made sure to leave it long so it hopefully won't shrink too much. I also painted my wiper arm flat black since the paint had worn away. I would have rather been rafted up in a group.
    Did you find any open screw holes?
    · Share on Facebook
  • Cableguy GregCableguy Greg Member Posts: 5,077 ✭✭✭✭✭
    Handymans342 said:
    Cableguy Greg said:
    I removed my windshield screw cover vinyl, pulled out the screws and rebedded them with 3M4000 caulk. I then installed my new screw cover vinyl and made sure to leave it long so it hopefully won't shrink too much. I also painted my wiper arm flat black since the paint had worn away. I would have rather been rafted up in a group.
    Did you find any open screw holes?
    No open holes. I did have 2 that didn't have any caulk in them.
    2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes" (Sold)
    2022 Cherokee 294GEBG Black Label land yacht. 
    Go Steelers!!!
    · Share on Facebook
  • JoeStangJoeStang Member Posts: 1,138 ✭✭✭✭
    Heading to mine today to start the vhf install. Really not loving drilling holes in the boat, but it's worth it i guess. Put in Bay this weekend!!!
    2013 276 Cuddy ~ 350 MAG / B3
    · Share on Facebook
  • zaverin1zaverin1 Member Posts: 1,672 ✭✭✭
    Completed my pioneer sound system finally 
    had to run power cables for my amp and Headunit since original wiring didn't account for amp or high power audio.
    not to bad but took some time
    ended up with 4 6.5 pioneers two in cabin and 2 8inch next to the 6.5 on main deck. Running with pioneer 600watt amp and headunit.
    sounds amazing finally lol
    · Share on Facebook
  • zaverin1zaverin1 Member Posts: 1,672 ✭✭✭
    I dont need a sub but who knows maybe next year 
    · Share on Facebook
  • J3ffJ3ff Member Posts: 4,224 ✭✭✭✭✭
    took it to the southernmost point of cape cod and boated in the atlantic ocean :)  


    · Share on Facebook
  • zaverin1zaverin1 Member Posts: 1,672 ✭✭✭
    Sweet
    · Share on Facebook
  • Black_DiamondBlack_Diamond Member Posts: 5,439 ✭✭✭✭✭
    Finally got my VV Mobile in and working! 

    Past owner of a 2003 342FV
    PC BYC, Holland, MI
    · Share on Facebook
  • zaverin1zaverin1 Member Posts: 1,672 ✭✭✭
    Thanks 
    · Share on Facebook
  • J3ffJ3ff Member Posts: 4,224 ✭✭✭✭✭
    sweet upgrade!
    · Share on Facebook
  • zaverin1zaverin1 Member Posts: 1,672 ✭✭✭
    Next project is power converter
    dc to ac
    have it just need to find place and time to install 
    once again underwater diablo lights rock
    · Share on Facebook
  • StodgeStodge Member Posts: 2,738 ✭✭✭✭
    Next week I'm replacing the Lowrance HDS5 with a Garmin 721.  The HDS5 has started acting up (shutting itself off) and we have a big trip coming up in less that a month.  So time to get the navigation fixed.  Photos will follow.

    2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

    · Share on Facebook
  • WillhoundWillhound Member Posts: 4,240 ✭✭✭✭✭
    I think you'll like the Garmin @Stodge. Been a fan of Garmin products for years and had a 421 in my old boat for 5 years. A nice feature with Garmin is that if you get the Bluechart Vision chip it will enable an "Auto-Guidance" feature that will automatically chart a route with parameters you select, like minimum depth, minimum distance to land mass etc. Are you getting a deal on a 721? Because I think it's already been discontinued for the 722. That being said, the 721 is awesome and there should be good pricing on whatever models are still out there. 
    "Knot Quite Shore" - 2000 FV270 (Sold)
    2018 Cherokee 39RL Land Yacht (Sorry...)
    · Share on Facebook
  • StodgeStodge Member Posts: 2,738 ✭✭✭✭
    @Willhound I prefer Garmin too.  Had a 4208 on my FV280.  The 342 had the HDS5 with sonar so I was not in a hurry to replace it even though I didn't care for it.  I have other Garmin devices so now they can all share.

    I found the 721 on The GPS Store for $599 shipped.  They bundled in the Bluecharts G2 (not vision) for that price.  I "think" the only difference between the 721 and the 741 is that the 721 came without charts.

    2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

    · Share on Facebook
Sign In or Register to comment.