What did you do to your boat today

Comments

• Options

  JoeStang Member Posts: 1,121 ✭✭✭✭

  May 2018

  Got it 

  2013 276 Cuddy ~ 350 MAG / B3
  

  0 · Share on FacebookShare on Twitter
• Options

  raybo3 Administrator Posts: 5,464 admin

  May 2018

  Why not just put the batteries in a battery box with cover????? Just say'n

  2002 342 Fiesta Vee PC Point Of Pines YC Revere MA. popyc.org     raybo3@live.com

  0 · Share on FacebookShare on Twitter
• Options

  Michael T Member Posts: 7,227 ✭✭✭✭✭

  May 2018

  @aero3113 and @69fastback......tip of the hat to you guys. Being on call is never really " being off" as you have to abide by the "bottle to throttle" rules!

  0 · Share on FacebookShare on Twitter
• Options

  aero3113 Member Posts: 8,857 ✭✭✭✭✭

  May 2018

  Thanks @Michael T you’re right, but with knowing my schedule most of the time it’s not that bad. Also I love what I do when everything is running smooth!

  2008 330EC

  1 · Share on FacebookShare on Twitter
• Options

  JoeStang Member Posts: 1,121 ✭✭✭✭

  May 2018

  raybo3 said:

  Why not just put the batteries in a battery box with cover????? Just say'n

  I'm not against that, but Rinker had them installed that way, so I didnt have to pull the old trays out and re-seal them. Plus I BARELY fit the open trays there, so I'd bet the closed boxes would be a little wider and really snug.
  

  2013 276 Cuddy ~ 350 MAG / B3
  

  1 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  Ye my Rinker has exact same setup
  3 batteries acrross.

  0 · Share on FacebookShare on Twitter
• Options

  69fastback Member Posts: 951 ✭✭✭

  May 2018

  Michael T said:

  @aero3113 and @69fastback......tip of the hat to you guys. Being on call is never really " being off" as you have to abide by the "bottle to throttle" rules!

  You're correct about that. That's 12 hours for us too......errrrrr 12 feet?  Either way. Lol
  
  
  I'm loading up my tent and camping equipment now, for a weekend with the family on Lake Texoma. Winds were supposed to be calm tomorrow, but now they're saying 25 mph....ugh. My boat is hardly big enough to enjoy Texoma in strong winds. 
  

  0 · Share on FacebookShare on Twitter
• Options

  Stodge Member Posts: 2,738 ✭✭✭✭

  May 2018

  
  
  Added a motion sensor to the light in the head.  Works pretty well.
  
  

  2002 FV 342 on Lake St. Clair - Past Commodore SHC - Vessel Examiner USCGAUX

  0 · Share on FacebookShare on Twitter
• Options

  J3ff Member Posts: 4,062 ✭✭✭✭✭

  May 2018 edited May 2018

  Not much, been raining all week and weekend! 

  Post edited by J3ff on May 2018

  1 · Share on FacebookShare on Twitter
• Options

  JoeStang Member Posts: 1,121 ✭✭✭✭

  May 2018

  Nice add Stodge, little stuff like that can make a big difference. 
  
  I'm continuing with my radio upgrade today. Have to make a custom spacer for the tower mounts, since the bimini pole is alot smaller than the 2" the mount is designed for. Gonna sand & paint paint these black before installing to blend in more. 
  
  
  

  2013 276 Cuddy ~ 350 MAG / B3
  

  1 · Share on FacebookShare on Twitter
• Options

  J3ff Member Posts: 4,062 ✭✭✭✭✭

  May 2018

  did you 3d print that? Pretty sure I could make whatever you needed with a 3d printer and no sanding needed. 

  0 · Share on FacebookShare on Twitter
• Options

  JoeStang Member Posts: 1,121 ✭✭✭✭

  May 2018

  Haha! No, def not 3d printed. That's a PVC tube inside a PVC tube inside a PVC tube. Cut to size with a hand saw lol. My woodworking tools may be limited, but my ability to cheaply make a part is not. LOL

  2013 276 Cuddy ~ 350 MAG / B3
  

  1 · Share on FacebookShare on Twitter
• Options

  Dream_Inn Member, Moderator Posts: 7,569 mod

  May 2018

  I had this ugly yellow small storage space that I've been wanting to remove.

  

  Here is a picture of the new door I installed in place of the yellow cabinet in the pic above.  The door gives me access to a large storage area behind it.

  
  

  

  In the above pic, is the space behind it.  Even enough room to store my tools.  I need to put a basket or two in there to keep it all neat, but definitely much better!

  Dream 'Inn III -- 2008 400 Express

  2 · Share on FacebookShare on Twitter
• Options

  aero3113 Member Posts: 8,857 ✭✭✭✭✭

  May 2018

  Very nice upgrade!

  2008 330EC

  0 · Share on FacebookShare on Twitter
• Options

  LaRea Member, Moderator Posts: 7,578 mod

  May 2018

  Nice.  That original is a dysfunctional POS, but Rinker used them for years.  Where did you get the replacement?

  0 · Share on FacebookShare on Twitter
• Options

  Dream_Inn Member, Moderator Posts: 7,569 mod

  May 2018

  LaRea said:

  Nice.  That original is a dysfunctional POS, but Rinker used them for years.  Where did you get the replacement?

  
  greatlakesskipper of course!

  Dream 'Inn III -- 2008 400 Express

  -1 · Share on FacebookShare on Twitter
• Options

  JonnyM Member Posts: 302 ✭✭✭

  May 2018

  Washed and waxed, finally launching tonight.

  "Mosi on Dahn"  2003 Fiesta Vee 270

  1 · Share on FacebookShare on Twitter
• Options

  LaRea Member, Moderator Posts: 7,578 mod

  May 2018

  @JonnyM what's the origin of your boat's name?
  

  0 · Share on FacebookShare on Twitter
• Options

  JonnyM Member Posts: 302 ✭✭✭

  May 2018

  "Mosi" is the 1st 4 letters in my last name and "Dahn" is Pittsburghese for down.

  "Mosi on Dahn"  2003 Fiesta Vee 270

  3 · Share on FacebookShare on Twitter
• Options

  Cableguy Greg Member Posts: 5,013 ✭✭✭✭✭

  May 2018

  Looks good @JonnyM . Don't forget your 20 sticker. Hope to see you out and about sometime. We will be around all weekend.
  

  2008 280 Express Cruiser, 6.2MPI, B3, Pittsburgh, PA "Blue Ayes"
  Go Steelers!!!
  

  1 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  
  

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  Worked on some yanmars
  worker on my boat
  cleaned my killer seadoo lol

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  Lol

  1 · Share on FacebookShare on Twitter
• Options

  Handymans342 Member Posts: 10,375 ✭✭✭✭✭

  May 2018

  zaverin1 said:

  Worked on some yanmars
  worker on my boat
  cleaned my killer seadoo lol

  UFB

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  What that mean 

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  Lol
  I just did
  but my xp goes
  about 60mph 
  its not fast compared to new skis but its fun
  light and throwable.
  it has a heavy moded seadoo 900 block

  0 · Share on FacebookShare on Twitter
• Options

  Handymans342 Member Posts: 10,375 ✭✭✭✭✭

  May 2018

  You work on Yanmars but hate diesels. I give up

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  They smell lol

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  Yanmars are the most user friendly diesels in my opinion

  0 · Share on FacebookShare on Twitter
• Options

  zaverin1 Member Posts: 1,672 ✭✭✭

  May 2018

  I’ll work with horse crap lol if it pays 

  2 · Share on FacebookShare on Twitter